Heavy Machines tools: Drehmaschinen


Posted December 5, 2012 by sarahcoolen

Of all engineering tools used in the production of various items, Drehmaschinen is crucial. The lathe is designed to hold the work piece firmly on its position.

 
Of all engineering tools used in the production of various items, Drehmaschinen is crucial. The lathe is designed to hold the work piece firmly on its position. Unlike Drehbank, the device is made of tool steel on its center. It is used to produce cylindrical objects of different materials such as plastics and steel. It is a very essential tool in that almost every part that is used in the engine is manufactured by this center Lathe. We have two classifications of center lathe. The first one is manual lathes which are operated manually by human. Category two is CNC lathes that is controlled and programmed by the computer. The CNC (Computer controlled lathes) is controlled such that it can operate certain amount of work.

To give an illustration of manual Drehmaschinen, its components include gear levers, headstock, tailstock, tool post, coolant supply, Chuck, top slide and feed shaft. Each part has its own function. The tool is controlled by a person who has an experience of handling various handles like cross slide, top slide and others in order to produce desired product. Unlike the Drehbank, the headstock of the machine can be opened. Here, you can see the way various gears are arranged.

Inside the headstock of the Drehmaschinen, gears can be replaced with the aim of altering its rotation speed of chunk. If you want to open the lathe, switching it off is a must. If you happen to open while the machine is on, the motor will automatically cut off. Switching off the machine is a firm safety measure. Like the Drehbank, the speed of rotating gears can be increased or reduced by using gear levers. Gear levers are usually located in the upper section in the headstock. Here, you can vary the speed using the different levers.

For effective varying of speed of Drehmaschinen, you need to changing the inside arrangement of gears. Arrange the gears in such a way that they produce your desired speed. For the advanced machines, they possess different gear wheels that will allow operators to change the speed easily. On the other side, turning wooden Drehbank is necessary for woodworkers. Wood workers should be able to use this deice in shaping wooden objects. Wooden structures that are round such as spindles, wooden bowls and handles can be shaped by the turning lathe. The tool is believed to originate from Egypt where wood worker technology started. It was also used in shaping various structures in their tall pyramids.

Finally, it is good to understand on how to set up your Drehbank. You new turning lathe, you need to position it where there is enough light. If you use bulbs, choose the bulbs with maximum light. For stability purposes, you need to bolt it to the workshop floor. Most of turning lathes come with their own bolts. Again, they require enough space to allow turners to turn around as they work. When purchasing turning or center lathes, turners need to consider the quality. Lathes made of poor quality materials lust easily and cannot serve for long.
Both wood and metal experts need to know about Drehmaschinen http://www.gk-werkzeugmaschinen.de as it will equip them with adequate lathe knowledge. Information of Drehbank http://www.gk-werkzeugmaschinen.de is necessary for metal workers.
-- END ---
Share Facebook Twitter
Print Friendly and PDF DisclaimerReport Abuse
Contact Email [email protected]
Issued By Sarah Coolen
Website Heavy Machines tools: Drehmaschinen
Country
Categories Engineering
Tags Drehmaschinen, Drehbank
Last Updated December 5, 2012