If you have recently bough a house which has a malfunctioning hot tub installed, you probably do not know how to make it work again. Hot tubs are not as complex as one may think, but they do contain some parts which require some form of maintenance and attention. The reason why such a piece of equipment might not be working can vary from problems, staring with the old hot tub heater and going as far as a poorly made engine in the spa pump. In this article we will offer you answer to some of the common questions regarding a not working hot tub, explain how you can correctly identify the source of the problem but also offer support in the process of purchasing new parts.

How can I tell if need to replace the whole heater or just parts of it?
There are several symptoms you can easily point out concerning a malfunctioning heater, and the first refers to the machine’s maine attribute. To be more precise, if the water is not heating but it’s circulating, there might be an issue with the heating element. If the water in the tub is heating too slowly or the heater keeps turning on and then off you, might need to change the filter cartridge. In addition to that, the heater’s inability to make the water as warm as you would like it to be might also be caused by the fact that the insulating cover is damaged, meaning you will have to replace this part solely.

Why does the water overheat?
There are several reason why the water in your hot tub might overheat, one of the most common being a stuck thermostat. If that does not seem to be your problem, you can always check if there is a blocked relay or contractor in your spa pack, or if the pump has been left working on high speed for a longer period of time. Another element which may cause such a problem could be a defective high-limit switch.

The spa pump keeps making weird noises. Is it broken?
Often times, people claim that their spa is making weird noises and that the pump seems to be humming. When such a thing happens, it most cases it’s a jammed propeller in the pump’s motor. However, such a sound can also be caused by old or poorly made bearings which have seized due to continuous usage. Other problems which may lead to the appearance of such a noise may be a dirty pump switch, burnt motor windings or a defective starter capacitator.
If you are sick and tired of looking for a quality hot tub heater http://www.cedartubsdirect.com/hot-tub-heaters-c-3.html which comes at a good price, we can put an end to this nerve-wrecking activity. Let us provide you with the exact heater you need, but also with a spa pump http://www.cedartubsdirect.com/hot-tub-pumps-c-4.html which you will be able to use for a long period of time without any problems. Visit our page today and find out how you can benefit from a discount but also to see the wide range of durable products we have to offer!