Huitong · Newsroom

Excavator long boom manufacturer remind you to pay attention to this operation
The above are the points that the excavator long boom manufacturer think need to pay attention to when taking over the work of the excavator. You can learn from it.

July 29, 2021

Excavator long boom manufacturer tell you how to choose
Excavator long boom manufacturer believe that the first consideration in selecting an excavator is performance. If an excavator does not even meet the performance requirements, then we cannot buy such an excavator.

July 28, 2021

How to cool down your ripper arm of the excavator in summer
Moreover, the ripper arm of the excavator deal with large stones every day. The olecranon device is used to crush the stones and cause friction. It’s hot, let alone that the rock arm has been working for several hours.

July 27, 2021

Can not ignore the oil pressure of the ripper arm of the excavator
The engine has a huge loss. In fact, there are many reasons for the abnormal oil pressure of the rock arm of the excavator.

July 26, 2021

Is the excavator ripper arm manufacturer right?
Why do excavator ripper arm manufacturer say so? Maybe everyone shares the same feeling. They don’t know how to solve problems when they encounter problems. In fact, there is an easy solution to everything.

July 24, 2021

Excavator ripper arm manufacturer teach you how to mine a mine environmentally
We can use the large-scale equipment of the excavator ripper arm manufacturer to mechanically mine, because the mine is full of too many unknowns, especially most of the stones, and the general large-scale machinery.

July 23, 2021

Why are second-hand excavator long arm so popular?
In this case, second-hand excavator long arm are cheap and high in value, and of course they are more popular.

July 22, 2021

How to evaluate the used excavator long arm?
The reason why we need to evaluate the excavator long arm is because we all want to buy something that is good value for money.

July 21, 2021

Unexpectedly, the ability of the excavator ripper arm is so outstanding
At first, the front end of the rock arm was equipped with a ripper and a bucket cylinder, and the solid arm at the rear end was cast with high-strength manganese steel.

July 21, 2021

Let's see how the excavator ripper arm solves this obstacle
It is omnipotent to go up the mountain, open the road, and drill the hole. It can be seen how strong the excavator ripper arm is.

July 17, 2021

Maintenance tips for excavator ripper arm manufacturers
Excavator ripper arm manufacturers must replace the wearing parts in time for the replacement of maintenance parts, and replace the new maintenance parts strictly according to the maintenance time.

July 16, 2021

Excavator ripper arm manufacturers teach you how to save money
Regarding the cleaning of the hydraulic system, the excavator ripper arm manufacturers does this. First prepare the tools for disassembly, and of course, prepare some cotton cloth and high-pressure water guns.

July 15, 2021

The position of the long arm of excavator should be protected
The importance of this position of the long arm of excavator may not be expected by everyone.

July 14, 2021

Do you know the characteristics of the long arm of excavator booms
Relatively speaking, the long arm of excavator will have a larger range to compensate for the working conditions that ordinary excavators cannot achieve.

July 13, 2021

If you don’t understand, you can ask the excavator long boom manufacturer
Therefore, if you don't understand the maintenance and maintenance of construction machinery, you can ask the excavator long boom manufacturer.

July 12, 2021

Excavator long boom manufacturer say that its role is more than this
The reason why excavator long boom manufacturer say this is because the risk factor of construction in the mine is relatively high.

July 10, 2021

What parts are inseparable from the long boom of the excavator
In fact, the parts that cannot be separated from the long arm of the excavator are also inseparable from many construction machinery and equipment.

July 9, 2021

This construction needs to be completed by the long arm of the excavator
Not only that, but also the use of long arm of the excavator to help free up many parking spaces and solve many car owners' parking difficulties.

July 8, 2021

Why is the excavator ripper arm called an infrastructure madman
The excavator ripper arm can be seen digging rocks on the mountain roads. Its ability is beyond your imagination, so the rock arm of the excavator has always been called the infrastructure madman.

July 7, 2021

Do you know the advantages of excavator ripper arm
Therefore, the current rock arms of excavators are all solid arms. Increase the self-weight, so that you will have more strength at work, and these advantages are enough to make the excavator ripper arm work smoothly in the mine.

July 6, 2021

Excavator ripper arm manufacturers tell you how to reduce costs
Rock arms have higher efficiency and lower loss than traditional breakers, and they have higher operating efficiency and even lower maintenance costs.

July 5, 2021

How does excavator ripper arm manufacturers reuse resources
Everyone knows that almost all construction waste is wrapped in concrete blocks with steel bars. It can be said that this kind of waste is very difficult to deal with, and it is even an annoyance for many people in the project.

July 3, 2021

The construction artifact recommended by the excavator Long boom manufacturers
The role of construction artifacts that can be ranked in the hearts of excavator long boom manufacturers in the field of construction machinery is naturally not to be underestimated.

July 3, 2021

Long boom manufacturers' views on the disparity in the price of accessories
Excavator long boom manufacturers feel that the quality of accessories of different brands is different, and there is a large disparity in excavator accessories.

July 1, 2021

What to do if the long reach excavator boom is installed on the wrong side
Before talking about the problem of the long reach excavator boom, let's talk about what kind of excavator can modify the extension arm.

June 30, 2021

How to choose the configuration for long reach excavator boom
Since you want to choose the long reach excavator boom configuration, it depends on which type of excavator extension arm you own, is it a two-stage, three-stage or a small excavator?

June 29, 2021

Let's see how the excavator ripper boom moves the mountain
This spirit has affected people from generation to generation, but now with the excavator ripper boom, the story has finally become a reality, and some geographical environments are complicated.

June 28, 2021

Tips for maintenance of excavator ripper boom
Excavator ripper boom are familiar to anyone who works in the machinery industry. Most of them are used for rock-breaking work.

June 28, 2021

Long reach boom for excavator fuel-saving tips, saving is earning
Digging is the main work of the long reach boom for excavator, but it can also save money when digging. When loading a truck or other efficient operations, every bucket of the digging must be full.

June 25, 2021

Long reach boom for excavator working in the stone yard
Even for rock excavation with high work intensity, it is necessary to install a thickened long reach boom for excavator to cope with the harsh working conditions and ensure the smooth completion of the project.

June 24, 2021

What are the wrong operations of the rock arm of the excavator
At this time, we will work again, which can protect the rock arm of the excavator well. The arm can guarantee the quality of the work.

June 23, 2021

Rock arm of the excavator manufacturers check "quality"
And we rock arm of the excavator manufacturers It will be modified according to various working conditions, which can achieve indestructible effects, and can also provide after-sales warranty services.

June 22, 2021

What are the misunderstandings in the operation of the excavator rock arm
If you want to increase the life of his mission, natural cooling is a good way, and we should also pay attention to the cylinder pressure of the rock arm of the excavator and the sharpness of the front device.

June 21, 2021

Here comes the recommendation of the excavator rock arm manufacturer
Accumulation can even save a lot of money in recent years. The excavator rock arm manufacturer has been promoting it to let more people know it and understand it.

June 21, 2021

What are the advantages of excavator ripper arm
The working ability of the excavator ripper arm is obvious to all. The multi-purpose function of one machine accelerates the pace of demolition and construction of the entire village in the city.

June 18, 2021

How excavator ripper arm help rural development
Nowadays, many farmlands have been abandoned, and the soil has been agglomerated, and green plants can no longer be planted, so the excavator ripper arm is also very important. Give full play to its power and turn the deserted land into treasure.

June 17, 2021

How to choose an rock arm of excavator manufacturer
Therefore, when we choose the rock arm of excavator manufacturer, we must choose good quality, and must pass the product workmanship. Don't pit yourself for the price.

June 16, 2021

Fast road repairing with rock arm of excavator
Because the power of the crusher is not as high as that of the rock arm of the excavator, it is noisy and raises a lot of dust. For the sake of environmental protection, the rock arm of excavator is now customized.

June 15, 2021

Let's see how the excavator ripper boom breaks the rock
And the work efficiency is also unambiguous. You can easily dig out and break the stone in a few hours. We can choose the excavator ripper boom.

June 12, 2021

Why are there excavator ripper boom manufacturers
The rock arm is also called the olecranon arm. The front section has a sharp device. The angle of the bend makes the force more concentrated. Compared with the traditional operation, it is very efficient.

June 11, 2021

Do you know the excavator ripper arm
The custom-made excavator ripper arm has low cost, less environmental pollution, and its work efficiency is far higher than that of the current breaking hammers on the market.

June 10, 2021

How is the excavator ripper arm produced
Huitong Heavy Industry is a professional manufacturer of excavator ripper arm. Let’s take a look at how it is produced today. Our requirements for a product are very strict.

June 9, 2021

The characteristics and development of excavator ripper boom arm
One-piece excavator ripper boom arm has lower cost, less consumption, greater power than before, longer service life, more labor-saving maintenance than before, lower failure rate, and reduces the pressure on the driver.

June 8, 2021

Maintenance method of excavator ripper boom arm
The excavator ripper boom arm needs to be maintained after use, because the long-term work of the machine in an extremely harsh environment will cause serious wear on the excavator.

June 7, 2021

What have been learned from the excavator pile driving boom manufacturer
Excavator pile driving boom manufacturers tell you that maintenance is actually very important, but many people only add oil and replace vulnerable parts.

June 4, 2021

Long reach excavator boom helps revitalize rural construction
With the support of financial capital, people can customize the long reach excavator boom, and use machinery to assist the development of the industry and obtain better benefits.

June 3, 2021

What troubles do you have after customizing long reach excavator boom
Although it is easy to long reach excavator boom, it is not easy to find the operator of the long reach excavator boom. Many owners who own equipment are bothered by this.

June 2, 2021

How to do the safety inspection of excavator hydraulic quick coupler
The excavator hydraulic quick coupler is a device installed on the excavator arm or backhoe arm for quick attachment/removal of accessories.

June 1, 2021

What to pay attention to when installing excavator hydraulic quick coupler
Although accidents occurred using the excavator hydraulic quick coupler, accident statistics show that most accidents occurred on semi-automatic systems where manual safety pins should be inserted, but the operator did not successfully insert them.

May 31, 2021

What is the production process of the excavator pile driving boom manufacturer
The production master of the excavator pile driving boom manufacturer has more than ten years of work experience. These aspects are simple and easy.

May 31, 2021