Huitong · Pressroom

Maintenance operation method of excavator hydraulic hammer accessories
Therefore, during the striking operation, always pay attention to the breakdown force of the excavator hydraulic hammer. The breakdown force is not suitable. Don't do homework at that time.

October 20, 2021

Precautions for the use of excavator hydraulic hammer
19 Misunderstandings in the Operation of Excavator Hydraulic Hammer In order to better use the breaker equipment and prolong the service life of the main equipment, please study carefully.

October 19, 2021

What is the reason for the slow working frequency of excavator hydraulic breaker
Therefore, the working frequency of the excavator hydraulic breaker is not only to consider the problem of the excavator hydraulic breaker itself, but also to consider whether the excavator has malfunctions and problems.

October 18, 2021

What is the reason for the weakness of excavator hydraulic breaker
Regarding pressure relief, there are several situations. The leakage of excavator hydraulic breaker is mainly divided into leakage at the fixed seal and leakage at the moving seal.

October 18, 2021

Common problems of excavator hydraulic breaker
Mastering the working method of the equipment will also increase the service life of the excavator hydraulic breaker. Air strike means that no object or raw material bears the interaction force of the isolating switch.

October 14, 2021

Do you know the correct use of a excavator hydraulic breaker
The excavator hydraulic breaker is generally used in demolition and mines. During the construction, dust is easy to enter the breaker cylinder along the steel drill, which will cause the pollution and aging of the hydraulic oil.

October 14, 2021

How to maintain the excavator HD bucket
The main inspection contents are: the degree of wear of the excavator HD bucket body and whether there are cracks. If the degree of wear is severe, reinforcement should be considered.

October 12, 2021

Correct maintenance of excavator HD bucket-bucket teeth are the key
The main inspection contents are: the degree of wear and tear of the excavator HD bucket body and whether there are cracks. If the degree of wear is serious, reinforcement should be considered.

October 11, 2021

The excavator long fronts that you don’t own is so important
When the excavator long fronts encounters problems during use, the defects should be eliminated in time to provide experience for the next manufacturing.

October 11, 2021

This operation is very important for the excavator long fronts
Everyone in their daily lives and in some infrastructure constructions should often be able to see a variety of different construction machinery, including the silhouette of excavator long fronts.

October 8, 2021

How to reinforce the excavator gp bucket 2
The teeth of the excavator gp bucket must be inserted into the soil like a knife cuts vegetables, rather than "slapped" into the soil. When it reaches a certain depth, complete the hook and raise the arm.

October 7, 2021

How to reinforce the excavator gp bucket 1
If the welding process is not in place, it will greatly affect the quality of the excavator gp bucket and affect the service life of the bucket.

October 6, 2021

What technology expands the horizons of excavator long reach front manufacturers
Favor. At the same time, the cost of these laser technologies is lower than that of manual labor, which naturally makes the excavator long reach front manufacturers more worry-free.

September 30, 2021

Excavator long reach front manufacturers teach you how to level with excavator
These are the methods provided by the excavator long reach front manufacturers. If you have a better method, you can continue to add it.

September 29, 2021

How to maintain the excavator gp buckets
Under normal circumstances, the scraping at the tail of the excavator gp buckets is mostly caused by rotation, so the operator should understand the data of the tail rotation radius

September 28, 2021

Who said that the excavator gp buckets does not need maintenance?
As we all know, the excavator gp buckets is an important part of the working device of the excavator. The excavator gp buckets is the most used accessory when the excavator comes out in some specific work situations.

September 27, 2021

Let everyone study what is hydraulic excavator quick coupler?
Excavator quick coupler connection device, also called quick-change, quick coupling, can quickly install and switch various configuration attachments on the excavator, and expand the scope of use of the excavator.

September 25, 2021

Excavator quick coupler are divided into: hydraulic and mechani
There are three types of excavator quick coupler, and the functions of each type are different, so the scope of their application is also different. Here is a brief introduction to these three methods.

September 24, 2021

Excavator long reach fronts manufacturers remind everyone not to ignore this
So what basic knowledge do the excavator long reach fronts manufacturers think that people can make their work more effective after understanding it?

September 23, 2021

How can excavator long reach fronts manufacturers improve product quality
This requires the person in charge of the company to put the quality of the excavator long reach fronts product first.

September 22, 2021

Which aspect of the excavator rock ripper attracts you
In terms of the working principle, the crushing capacity is increased through the pressure of its own weight. In other words, the heavier the weight, the stronger the destructive force, so the excavator ripper arm is better in every respect.

September 10, 2021

Why is the efficiency of the excavator rock ripper so high
The structure of the excavator rock ripper is mainly composed of three parts: the big arm, the forearm, and the enlarged stick cylinder.

September 9, 2021

The operating skills of the excavator long reach fronts you don't know
The above are some tips that can make the long reach fronts of the excavator save fuel and efficient. If you need it, you can learn from it.

September 9, 2021

What is the difference between the original and assembled long reach fronts
One is the appearance. The appearance of the original excavator long reach fronts and assembly may be mostly the same, and for those who are not careful, it may feel exactly the same.

September 7, 2021

Three precautions for purchasing excavator rock ripper
We hope you can choose the excavator rock ripper products you like by paying attention to the above points when purchasing.

September 6, 2021

How to drive the excavator rock ripper in summer
Because the temperature in summer is quite high, driving the excavator rock ripper in this weather has a feeling of washing a sauna.

September 3, 2021

Excavator long reach fronts helps environmental pollution control
For the section of the river to be repaired, the excavator long reach fronts should be used to repair it.

September 1, 2021

How is the advancement of excavator long reach fronts technology
The first is the driving and maintenance of the excavator long reach fronts. I also said that this is a promising technology, so what kind of technology is it?

August 31, 2021

Rock Ripper Arm manufacturers advise you not to use inferior diesel
The rock ripper arm manufacturers feels that if you choose low-quality diesel, can you still work if the engine has a problem? Can the progress of the project be guaranteed?

August 30, 2021

Rock Ripper Arm manufacturers teach you how to solve high water temperature
The rock ripper arm manufacturers says that generally, as long as it is not overloaded, the water temperature is normal.

August 28, 2021

Maintenance of the long reach fronts for hydraulic excavator in different period
According to the above statement, we can understand that the maintenance of the long reach fronts for hydraulic excavator is indeed different in different time periods.

August 27, 2021

How to use the long reach fronts for hydraulic excavator on rainy days
Everyone should also know that the working environment of the long reach fronts for hydraulic excavator will be more complicated.

August 26, 2021

Why does your excavator ripper arms consume so much fuel
But there are many people whose rock arms of excavators have also experienced soaring fuel consumption. Why is your excavator ripper arms fuel consumption so high?

August 24, 2021

How to remove rust from your excavator ripper arms
During the anti-rust operation of excavator ripper arms parts, it is necessary to deal with frequently used parts. This is a crucial step.

August 23, 2021

Why does the excavator long arms increase in price
In fact, there is a phenomenon behind the increase in the price of excavator long arms, that is, people’s demand for such construction machinery as excavator long arms has increased

August 21, 2021

Safety knowledge not to be forgotten in the excavator long arms
In fact, there are many potential hazards in the process of using the excavator long arms to work, but not all of them are prone to occur.

August 20, 2021

What kind of excavator can modify the excavator ripper arm
It is not too simple to work, so in these working conditions, the excavator ripper arm has become the unanimous choice of many consumers, so for all consumers, is your choice also it?

August 19, 2021

How to properly clean the dirt of the excavator ripper arm
Clean up, then there is no risk of damaging the excavator ripper arm, so in many cases unnecessary work is often very important.

August 18, 2021

Reminder from the excavator long arm manufacturer
Some accidents are not only caused by their own inattention, but also accidents caused by other places. Excavator long arm manufacturer have said, these can not be careless.

August 17, 2021

Answers from excavator long arm manufacturer
any novice friends don't know what the equipped dozer is used for. This doubt, the excavator long arm manufacturer will answer for you.

August 17, 2021

How to deal with the high temperature problem of excavator long arm
One of the key points to deal with the high temperature of the excavator long arm is to prevent it first. How to prevent it?

August 13, 2021

The importance of maintaining the excavator long arm
The second is to clean up the foreign matter on the chassis of the excavator long arm in time to avoid the foreign matter from increasing the abrasion of the chassis.

August 12, 2021

Excavator ripper arm manufacturer teach you how to maintain it
Therefore, the machine cannot be parked for a long time. After this, our excavator ripper arm manufacturer will teach you how to maintain it.

August 11, 2021

How does the excavator ripper arm manufacturer repair
Because the machinery has broken down, it must be sent for repairs. In this respect, the excavator ripper arm manufacturer is professional.

August 10, 2021

How to deal with the high temperature problem of excavator long arm
In addition to the above two points, the water tank of the excavator long arm should be filled with antifreeze as much as possible, because water is more likely to cause scale in the water tank

August 9, 2021

The importance of maintaining the excavator long arm
The second is to clean up the foreign matter on the chassis of the excavator long arm in time to avoid the foreign matter from increasing the abrasion of the chassis.

August 7, 2021

Excavator ripper arm manufacturer teach you how to maintain it
Today’s excavator ripper arm manufacturer say “raising” is not about raising, but also about raising. The so-called machinery is 3 points and 7 points.

August 7, 2021

How does the excavator ripper arm manufacturer repair
The excavator rock arm manufacturer thinks that these small problems are not required at all, or It is enough to weld a little by yourself, because these do not affect the construction at all.

August 5, 2021

How to deal with the long arm of the excavator in the face of this kind of accid
What are the accidents faced by the long arm of the excavator mentioned here? In fact, it is an accident that we are particularly prone to encounter on rainy days, that is, a car stuck accident.

August 3, 2021

How to properly clean the long arm of the excavator
In fact, in order to reduce the number of failures with the long arm of the excavator, we mainly manage the relationship between fuel, lubricating oil, water and air.

August 2, 2021

 264 123456