First check the oil pump of the hydraulic rock breaker hammer, and adjust the oil pressure and flow that is too high or too low to realize the control of the hammer;

The power source of the hydraulic rock breaker hammer is the pressure oil provided by the pumping station of the excavator or loader.

How to repair, we must first understand the reasons for the cracks in the long reach fronts excavating boom, mainly including bubbles, slag inclusions and micro cracks in the original weld itself.

The SWE950ELR excavator has the largest digging depth of 26.5 meters in the world among the long reach fronts excavators of the same tonnage, with a digging radius of 31.5 meters.

The excavators long fronts boom is an important part of the construction machinery and equipment, because there is a demand for a supply so that it can be balanced.

We will introduce the relevant knowledge of the excavators long fronts boom here for the time being, hoping to help to everyone.

After all, if the boom is lengthened, the original hardness will definitely decrease, so our excavator long fronts boom manufacturers have long been aware of this.

Before the excavator long fronts boom manufacturers appeared, the excavator was helpless in the face of deep working conditions.

As an ordinary car spends so much fuel, the fuel consumption of the excavator long reach fronts is even more unimaginable. The large-displacement engine will roar as soon as it starts.

For consumers, it is necessary to shop around when purchasing an excavator extension arm. Choose a well-known brand of excavator long reach fronts before purchasing.

Since the emergence of excavator ripper boom, the speed of railway construction has accelerated a lot, just like the rock arm of an excavator pressed the fast forward button for railway construction.

It is superior. In addition, the modified excavator ripper boom can use its own length to reduce the number of excavator movements, making the excavation volume higher and more fuel-efficient.

These objective conditions make the excavator long fronts boom grease lubrication not allow any sloppy , so in order to prevent the working device from being troubled by external dust and severe wear, butter must be filled in time!

The current excavator long fronts boom is not like an ordinary excavator, so it has many more functions. In the infrastructure projects of various countries, there are still many cases of using the excavator long fronts boom.

Although standing on the front of the industry, we believe that long reach front manufacturers should pay more attention to the quality of their products. Our products play an important role in the new infrastructure.

For development, long reach front manufacturers are not only building bridges for the purpose of building bridges, but not only to facilitate the passage of villagers, but also have important significance to the development of our country.

The upgrade and development of a city cannot do without city construction. Urban construction cannot do without custom-made excavator long reach fronts.

Because all aspects of underground exploration are required, we need to use the strength of the excavator long reach fronts. In addition to the conventional excavation, it can also help with the cement pouring,

The participation of construction machinery cannot be avoided in transportation construction, and the excavator long front boom is a good tool to assist in the construction.

The process seems simple but in fact it is not simple. If we rely on ordinary machinery alone, it is of course more difficult, but after we have an excavator long front boom, these tasks could not be easier.

There are hydrogen fuel cell long front boom for excavator, hydrogen fuel cell muck trucks, hydrogen fuel cell dust suppression vehicles and so on.

Everyone knows that the main raw material of the long front boom for excavator is steel. Recently, the price of steel materials in the international community has soared, resulting in nearly doubling the steel materials in all regions.

Long reach fronts manufacturers use daily and genuine actions to form an honest and strict institutional atmosphere for the company's employees.

Therefore, many long reach fronts manufacturers have also tried many methods in terms of processing equipment, material selection, technology and Trials in various aspects such as craftsmanship, design and production, etc.

o how to choose a good excavator hydraulic rock hammer, the following are some tips organized by Huitong.

According to the expected "destruction" of the obstruction, the operator can immediately terminate the excavator hydraulic rock hammer before the overall target is exposed.

Seeing how the excavator long front boom is solved, it is nothing more than the difficulty of construction and the slow progress of the project.

The mountains are twisty and the roads are uneven. Many large machinery have no room to operate, but the excavator long front boom is different.

Because there is a big difference between a good and a defective excavator long front boom. Firstly, for engineering efficiency, and secondly for users, both have a great impact.

Everyone in their daily lives and in some infrastructure constructions should often be able to see a variety of different construction machinery, including the silhouette of an excavator long front boom.

Under the leadership of the excavator long reach fronts manufacturers and the village cadres, all the silt and garbage in the fish ponds were removed in less than half a day.

Therefore, with the cooperation of the excavator long reach fronts manufacturers and the support of the relevant departments, the cement road has appeared on the ground, and the villagers have also been drinking clean water resources.

In fact, river dredging is not difficult for the current technology, and we also have the help of a large mechanical the long reach arm for excavator.

This construction depends on long reach arm for excavator to complete, then what are the main aspects of urban transformation?

You can rest assured that you have custom-made long reach excavator arm.

There are many, with the help of custom-made long reach excavator arm to improve our environment.

In fact, the excavator rock boom manufacturers think that the maintenance in winter is more important. What do you think?

For consumers, how do you make choices? How to choose an excavator rock boom manufacturers is a very big proposition. First of all, we can start with the qualifications.

The excavator manual quick hitch is a structural product, which is composed of main body bracket, movable block, hydraulic cylinder, pin and other parts.

Excavator manual quick hitch are also called quick-change connectors and quick connectors. The quick connector can quickly install and switch various configuration parts on the excavator.

o avoid secondary damage to the excavator, if you can use the excavator rock booms well as required, you can avoid serious failure problems, so why not be better with "it".

Especially for those driving excavator rock booms, when digging a mountain, the soil is not only soft but also slippery with the invasion of light rain.

As one of the most common parts of excavators, hydraulic rock hammer are now widely used in mines, railways, highways, municipalities and other workplaces.

The working principle of the hydraulic rock hammer is mainly through the hydraulic system to promote the piston to perform reciprocating work.

The inside of the rock breaker hammer is a confined space. Except for air and hydraulic oil, if impurities or other hard objects enter, it may strain the piston of the breaker.

Rock breaker hammer are also called hydraulic picks, hydraulic guns, guns, crushing heads, etc. The power source is the pressure oil provided by the pumping station of the excavator or loader.

After finding out the cause, take corresponding measures, including replacing damaged or unqualified parts, reinstalling and debugging the excavator hydraulic breaker hammer, etc.

We must use good large-scale excavator hydraulic breaker hammer. Inferior breakers are prone to digging problems due to design, manufacturing, inspection and other links.

Therefore, during the striking operation, always pay attention to the breakdown force of the excavator hydraulic hammer. The breakdown force is not suitable. Don't do homework at that time.

19 Misunderstandings in the Operation of Excavator Hydraulic Hammer In order to better use the breaker equipment and prolong the service life of the main equipment, please study carefully.