Crimpen or punching is a process where a hole is punched into a sheet of metal to create different shapes. Punching, together with shearing and diie-cutting, is an integral part of the manufacturing industry. There are various large pieces of machinery that need very small parts without which they cannot operate. Punching is the process that is used for manufacturing these parts. And for manufacturing these small parts advanced stanzvorrichtung are available to buy. These punching machines are made by some specialized engineering firms.


What happens in crimpen? In this process a tool called punch is used along with a punching press. The punch is forced by the punching press through a metal sheet and the shearing as a result of this creates a hole in the metal sheet. To create specially shaped holes the punch is made to pass through a diie-cutting machine.


The stanzvorrichtung and the diie-cutting machine are located on either side of the metal sheet where the holes need to be made. When the punching press forces the punch through the diie-cutting machine the shearing force is localized so that cleaner edges are formed. To ensure that optimum force is used a small clearing is left between the punch and the diie-cutter. This also helps in preventing the punch from sticking to the diie. The thicker the metal sheet more is this clearance but it always less than the thickness of the sheet.


As the punch presses into the sheet through the diie-cutter a clean hole is created with a diameter that is equal to or slightly lesser than the diameter of the punch. Any scrap metal is collected by the diie-cutting machine. Depending on the crimpen process this scrap metal is either discarded or used in other manufacturing processes.


Crimpen using stanzvorrichtung can be of different types depending in the requirement. Blanking is a process where the punch is specially shaped so that multiple appropriate usable parts can be created from a sheet of metal. Hot punching is a process where the punching is done on a hot piece of metal sheet.


Crimpen using stanzvorrichtung is not only limited to metal sheets. Even plastic pieces can be created using this process. From the most simple elements like paper clips to the most complex machinery parts – punching, diie-cutting and shearing are heavily involved in the their manufacturing processes. Hence, the demand for these machines is very high in the manufacturing sector. And as a result, you will find some highly specialized manufacturers of these machines.



Like any other engineering fabrication crimpen machines are also made best by the German firms. Germans are almost obsessed with their manufacturing and engineering processes and this ensures that they make the best machines in the world. When you are looking to buy stanzvorrichtung you would do well to concentrate on the German manufacturers because it is highly likely that these firms will be able to give you the best value for money machinery. Find out these German firms online and make your purchase.
Stanzautomaten http://www.ips-werkzeugtechnik.de are essential for the crimpen http://www.ips-werkzeugtechnik.de process.