Check the status of the operation of the machine and prepare thoroughly check program has been more and more important,Bearing From China http://www.skfbearing-china.com/
and the bearing as the focus of attention, because it is the most important of all the machines rotating parts, condition monitoring is an important part of the preventive maintenance, early detection of bearing damage in order to avoid because of the bearing damage caused by the unscheduled maintenance equipment during outage.
Importance especially in machine or harsh environment more should always check the bearing, the market has been quite a number of systems and equipment, used to monitor the bearing, the instruments are mostly based on the measurement of vibration.
However, not all the machines are equipped with the advanced equipment, in this case, the machine operators or maintenance engineers have to bearing fault signal remain on high alert, such as noise, temperature and vibration. Touch [listen to], [], [watch] are three important factors, the following views can be provided for your reference.
Listen to:
Using the hearing to identify irregular operation is a very common method of examples with the aid of electronic stethoscope to check that a certain parts of abnormal noise was experienced operator use. If the bearing is in good operation condition will be low purring sound, if a sharp hissing sound, make sound, and other irregular {TodayHot} generally represent bearing in the operation condition of bad.