First, the flat-panel TV wall mounting details. Just buy a flat panel TV, our preferred want to "settle down", seemingly simple electrical problem, but in fact a lot of attention. If you do not pre-done "homework", installed television may not only affect the viewing experience, but also may cause accidents, so do not be careless act.

(A) determine the installation location
1, to hang on the load-bearing walls
Before hanging flat-panel TV, you should first examine the structure of types of housing. Must be a solid brick wall, concrete or its equivalent strength of the mounting surface. Gypsum board walls do not fit hung TV, there is danger of falling. Open doors and windows more general non-load-bearing walls, flat-screen TVs hanging above are unsafe. Vertical walls of the rooms are safe, such as the living room or the bedroom there is no door or window completes the wall.

2, the surrounding environment to dry
Dry environment for extended life of the TV is critical. Because not many flat-panel TVs with waterproof protection, the radiator grille board will be in direct contact with the outside air, when the ambient humidity exceeds 80%, it is possible to make a TV abnormal situation. If the humidity is too large long-term, it may develop into a fatal mishap. Also, do not place the TV mounted near heat sources, but also to leave enough space for heat dissipation, excessive plant beside the TV is placed in improper practices. Power greater than 100W of flat-panel TVs, around the side of the pitch from the mounting surface of at least 10 cm in order to maintain air circulation, ventilation and cooling.

3, away from strong magnetic interference
If the long-term in a strong magnetic field, the television component will be magnetized to work well on TV. Although flat-panel TV on the wall, but still need to be kept away from strong electricity and the impact of a strong electromagnetic field around an object, such as cooker, microwave, etc., especially those appliances like radios can move this, but should always pay attention to the TV keep their distance. In addition, some large appliances, such as computers, refrigerators, air conditioners, etc., and do not be placed near a TV. The most overlooked is audio equipment, will generally choose to be placed near a TV, but do not be too close to the wall of flat-panel TVs, in order to avoid signal interference, affect the viewing experience.

4, the optimum viewing distance
For television, especially flat-panel television, we always emphasize the best perspective on the issue. Usually when installing flat screen TV, make sure to watch the display diagonal distance of at least 3-5 times the distance, the installation height should the user sitting on a stool or sofa and television center eye level (or slightly lower) is appropriate, under normal circumstances , away from the center of the TV for about 1.3m.

Two: the operation when installed.
1, to avoid scratching the display
Flat-panel TV is more "delicate" We believe it is very likely to cause physical damage to the surface, causing damage such as fine lines on the screen and the device to produce bad points. Therefore, the installation process requires careful when moving the machine to gently and be prepared bedding material to prevent scratching the display.

2, the first permanently installed wall mount
Accurate positioning of the mounting surface of the flat-panel TV mounting location, you must first fix the mounting surface pylons part, to ensure a solid flat-panel TVs, stable center of gravity, about the level of the difference of less than 1 degree. Metal components must be securely welded or side access shall be subject to anti-rust treatment.

3, using the horizontal ruler trimming
after the display hangs required level tape measure, adjusting screw allows the display rack completely horizontal position. Overall flat-panel TV installation location translational error should be less than 1cm, so the inclination error is less than 1 degree.

4, connect to other components
After confirming the above steps, you can connect the line to the back of the relevant interface or interfaces television side, and finally to the TV hanging above the rack and make sure that all hooks are fixed. So far rack mounted flat-panel TVs also to a paragraph.
More TV Monitor Wall Mount information ,you can check ：http://www.amazon.com/dp/B00D1C9IY8