Parquet and wooden floors in general have a natural shine that is then synthetically promoted. So, when they are new, they look very healthy and perfect. Now, dust, dirt, and constant cleaning added to the daily traffic, cause the erosion of the first layers of that glossy finish. So, the wood loses life and its appearance becomes sad and dull. We can restore its shine by laying floorboards over existing floorboards sanding.

Recover the shine in the wood:

To start the work, the first thing is to clean the floor, remove furniture, and leave the entire surface free. Then you have to prepare the floor by removing all the dust and dirt.

Use a vacuum cleaner for this as it is convenient to lift the dust off the floor, not move it. Also, when doing it with a brush or broom, the dust is likely to act like sandpaper, making the floor even shinier or scratching it.

Importance of pre-sanding:

Pre-sanding is important so that the wood absorbs and takes the product that will shine better later. Even so, if the floor lost shine but not everything. You can apply the varnish with a brush without floor sanding Northern Beaches, it will not be the same but the improvement will also be appreciable.

There are also home remedies to restore the shine of the laying floating floor over floorboards. Vinegar mixed with water is one of the most common options for wooden floors. This works when the floor has not lost all the varnish, as the vinegar does is improve the appearance of the varnish, not the wood.

Laundry detergent in water also works:

Let's say it's the closest thing to wax. Add two plugs to three liters of water and scrub the floor with a sponge or with a mop or mop. Repeat the process as many times as necessary until you achieve the desired shine.

Some people dare with a few drops of oil mixed with the same amount of vinegar. This creates a kind of homemade wax that must be applied directly to the floor area by area with a wide brush to speed up the work.

Then pass a cloth to rub and dry at the same time. This remedy is very effective but you have to be very careful not to overdo it with the oil as excess grease will create very slippery surfaces. That will stain and where fingerprints will be easily marked.

However, if you need a professional touch and finishing, it is advisable to hire a professional sanding service provider, and as for the cost of polishing floorboards.