Compared to other printing methods, there are fewer method parameters that need to be tweaked in the SLA printing process. The design phase is the essential part that needs to be checked in this process.

1. Selection of materials

A part where the SLA process differs from the FDM process is the choice of materials. FDM method uses solid filaments while the SLA printing process, on the other hand, uses liquid resins. The liquid resins used in this process are thermosets which are highly effective. It shows that the materials made with SLA printing service cannot be re-melted from the older materials.

2. Support structures

Just like the FDM process of printing, the SLA printing process also uses support structures. Since there is no chance of composite prints in the SLA printing process, the support structures made with SLA 3d printing service are to be made up of the same resin material, and the removal process needs to be done manually.

3. Warping

Curling or warping is an essential issue related to the SLA printing process. A few design principles can significantly minimize the inevitable circumstances of curling or warping. This will prevent stress buildup and will improve the efficiency of the products developed by this process.

Final Verdict

Our company is working hard to create a community of professional manufacturers and develop the best product with innovative ideas. Apart from SLA printing, there are other methods where our company excels, like the dlp 3d printing service. Our members are constantly challenging each other to create better products every day.

Contact:-

Facfox
Email- [email protected]
Phone- +86-0571-2990-3213
Website- https://facfox.com/service/sla-dlp-3d-printing-service