There are a number of benefits of buying air purifiers. Installing air purifier has a number of benefits. It keeps indoors absolutely clean, removes all the air-borne allergens and contaminants, removes odours and removes dust and dirt to make the breathing process cleaner. When you think that your system has stopped providing you with the benefits of keeping the indoor air clean then it is time for getting the system repaired.

Even if you have bought the top most model of the air purifier it tends to break sometime. Even the well-crafted machines breakdown and need repairs. The more complex system of your machine means you would need a more technical person for repairing and inspecting the system. Get your air-purifier repaired in a certified air purifier repair centre.

What all is needed for Air Purifier Repair?

It is easy to get all the replacement parts from the manufacturers or the suppliers. Your Local hardware store can also supply you screwdrivers, pliers, vacuum cleaners and more.

What are the Steps for Air-purifier Repair?

Disassemble mechanical air-purifiers first:
• Turn off the unit of the air-purifier and unplug the system. Remove the intake grills after pressing the release buttons that contain the pre-filters and then remove the filters.

• Remove any screws that hold the filter. For accessing the fan, you need to remove the long-screws, remove the main house and separate the halves.

• Remove the fan by prying, twisting or locking the ring from the end of the motor shaft. You need to wear safety Goggles for this. You need to be careful about not bending the ring before removing.

• Removing all the screws that hold the switch and motor housing together. Pull the housing apart for exposing the motor. Switch module will now slide out from the channels.

How to clean an air-purifier foam filter?

Just remove the intake grill from the air-purifiers. Gently vacuum that filters through the grille. Unplug the air-purifiers and pull out the precipitating cells. Make use of needle-nose pliers for unhooking the wire spring from the connectors. If you feel necessary you can just depress the connectors with screwdrivers and let the wire get free. Reverse this procedure for installing new wires.

You just need to remove the precipitating cells from the air-purifiers and set the multimeter on RX1 for testing resistance. Clip one tester probe to one of the cell frames and touch the other probe after that. Given here are some cleaning tips that help you clean your air-purifiers so that you would be able to maintain them for a long time. Just clean the pre-filters of all air purifiers clean from time to time. Replace the activated charcoal filter in 3-6 months and replace the HEPA filters at least once in a year.