We’re Ganesh Machinery. We’d like to offer you some safety tips about using milling machines.

Any kind of milling machine requires straightforward but important safety precautions while in use:

• Do not touch the rotating cutter.
• Place a wooden cushion or appropriate spread over the table surface to shield it from conceivable harm.
• Use the PAL framework while moving connections.
• Do not endeavor to fix arbor nuts utilizing machine power.
• When introducing or evacuating processing cutters, hold them with a cloth to anticipate cutting your hands.
• While setting up work, introduce the cutter last to avoid the risk of possible cuts.
• Never change the workpiece or work mounting gadgets when the machine is working.
• Materials should be expelled from the workpiece with a suitable rake and a brush.

Remember these key points before using a knee milling machine:

• Always fix the work piece in an adjusted position on the table. In the event that a bad habit is utilized it ought to be of strong development and safely appended to the table.
• Ensure all equipment is properly adjusted and secure before operation.
• Always guarantee that cutters are turning correctly and without indications of operational issues.
• Always stop the cutter axle when not cutting
• Handle processing cutters precisely - They have sharp edges
• Always place the rigging train spread on a partitioning head
• Use knee supports when required
• Never utilize a damaged processing machine cutter with even the slightest defect visible on blades.
• Never expel a part from the table using your fingers in a Tenon or tee opening.
• Always guarantee that the draw jolt on a vertical processing machine is appropriately drawn in and fixed.

The venerable geared head lathes and knee mills that we sold when we first started Ganesh Machinery in 1985 have been replaced with a whole new generation of high productivity machines. These machines include a broad range of manual and smaller units, as well is the fabulous new super-productive machines.

If you are considering buying a Knee Milling Machine, check out Ganesh Machinery’s huge range of products on our website here at www.ganeshmachinery.com.

Contact Us

GANESH MACHINERY
20869 PLUMMER St.
CHATSWORTH, CA 91311
Phone: 1-888-542-6374
Phone: (818) 349-9166
Fax: (818)349-7286
Email: [email protected]
Website: http://www.ganeshmachinery.com/