Heating is a vital part of all industrial processes. In most facilities where products and materials are being produced, some kind of heating process is employed. There is a wide range of heaters and boilers that have been created for industrial heating. The operation, design, and specifics vary with the area of application.
Thermal oil or hot oil heaters are the best options for industrial heating needs. There are various benefits of using thermal oil heaters which drive the demand for these industrial heaters. Some of them are:

1. No Need for Pressurization

Systems like steam heating require a certain level of pressure to function. With hot oil heating systems, all equipment is non-pressurised. This significantly reduces the risk of dangerous explosions in any facility, minimising the need to monitor and regulate system pressure levels continuously.

2. No Corrosion

Water is an affordable medium for heating, which makes steam heating a preferred system of heating. But steam heating also brings with it the dangers of corrosion. Steam heaters need to be carefully monitored for corrosion and require a lot of repair and -maintenance if they rust. These problems are non-existent in hot oil heaters as oil is a lubricant and can run smoothly through a heating system without causing corrosion.

3. No Need for Chemical Regulation

This advantage ties in with the one above; chemicals are required to treat water as it causes corrosion. These chemicals need to be carefully monitored and regulated to ensure that the system is operating effectively. As hot oil systems don’t cause corrosion and flow smoothly in the system, there is no need for chemical regulation.

4. Can Withstand Higher Temperatures

Operating temperatures are important in order to achieve optimal heating. Hot oil that is used in thermal oil heating systems have a higher boiling point than water, due to which these systems can operate at higher temperatures.

5. Safety

This is probably the most important reason for choosing a thermal oil heater. Hot oil heating is much safer compared to other heating processes. As this system doesn’t require pressurisation, the risk of a dangerous explosion is eliminated. Other problems that occur with steam heaters such as steam trap issues or freezing steam are also eliminated as the freezing point of hot oil is much lower than that of water.

Only the best industrial heater manufacturers will provide equipment that contains all the benefits mentioned above. A prime example of one such manufacturer is Thermax. They cater to the process heating needs of the widest possible range of industries. Visit https://www.thermaxglobal.com/ to know more.