If there is no sufficient refrigerant in the system there is no proper result. The specifications should match with the products used by the manufacturer to give a good air conditioning system.

Other than the manufacturers fault and the faulty installation, there are many reasons which affect the working of the air conditioner. If the appliance is not maintained properly or due to poor service procedures there may be poor results. If unqualified technicians are hired they may make problems worse. They may guess about the refrigerant levels and refill to make matters worse. It is always better to hire the technicians from a reputed maintenance company.

Multiple Reasons for the Air conditioner Malfunctioning

Air conditioners are always manufactured to undergo heavy duty operation. The manufacturer uses high quality and rugged products to make an air conditioner. If there is any mal functioning then it would be better to wait until the unit cools to find out if there are any visible problems. The fuse and the circuit breakers have to be checked to start with. If the circuit breaker switch has tripped it would be reset by pushing the button. If there are no visible problems then calling a technician would be advisable rather than handling the problem ourselves. If the weather is humid there may be a clog in the drain. If the air conditioning system is not properly mounted the draining system may not work properly.

Other Reasons behind a Poor Functioning Air conditioner

There are many reasons for the improper working of the air conditioner:

1.Filter: It is always better to change the filter at regular intervals. A dirty or a clogged filter would be the reason for the air conditioner mal functioning. Each manufacturer has a different filter. Some have to be changed monthly and some quarterly in a year. There are reusable filters which have to be cleaned and reused.

2.Thermostat: This device has to be on to control the temperature inside the house. The sunlight should not affect the temperature setting at any chance. If still there are temperature variations then the technician has to be consulted. Dirty filters reduce the air flow and its quality.

3.Leakage of Refrigerant: This leakage fluctuate the A/c temperature. Regular maintenance would reduce the chances of such leakages.

4.Drain: The drainage pipe has to be clear without any clogs. Dust, lint and dirt may clog the drainage and the pan may fill up. There are chances of the water leaking out of the A/c causing more damages.

5.Capacitor: A start capacitor gives a jolt to the motor to start working. The run capacitor gives out jolts to keep the motor running. The air conditioner stops working efficiently without proper capacitor input.

6.Compressor: The compressor propels oil to the coils to reduce the heat. If oil propulsion is not sufficient there are chances of the A/C getting heated up causing it to cease to work?

For more detail visit our website : https://www.staycool.com.au/