Specialityvalve is one of the top Pneumatic Actuated valve manufacturer in India. A pneumatic actuated valve is a type of valve that is controlled by a pneumatic actuator, which uses compressed air or gas to produce mechanical motion. The actuator converts the energy from the compressed air or gas into the motion required to operate the valve.
Pneumatic actuated valves are commonly used in industrial applications where it is necessary to control the flow of fluids or gases. They are often used in systems where the valve needs to be operated remotely or where it is difficult to access the valve manually. Pneumatic actuated valves are also used in hazardous environments where it is not safe for operators to manually operate the valve.
Pneumatic actuated valves can be configured in many different ways, including as globe valves, ball valves, butterfly valves, and gate valves. The type of valve used depends on the specific application and the requirements of the system.

Pneumatic Actuated Valve Manufacturer in India provides several types of valves including:
1. Globe valves
2. Ball valves
3. Butterfly valves
4. Diaphragm valves
5. Gate valves:

Advantages of pneumatic actuated valve:
1. Fast and precise control: Pneumatic actuators can respond quickly and precisely to changes in pressure, making them ideal for applications that require fast and accurate control.
2. Consistent performance: Pneumatic actuated valves are highly reliable and can maintain consistent performance over long periods of time. They also have a long lifespan and require minimal maintenance.
3. Safe operation: Pneumatic actuators are safe to use in hazardous environments because they do not produce sparks or generate heat.
4. Versatility: Pneumatic actuated valves can be configured in many different ways and can be used to control a wide range of fluids and gases.
5. Cost-effective: Pneumatic actuators are generally less expensive than other types of actuators, such as electric or hydraulic actuators.

Industries of pneumatic actuated valve:
1. Oil and gas
2. Chemical processing
3. Water and wastewater treatment
4. Power generation

Configuration of a Pneumatic Actuator:
• 4-20 amp
• Pneumatic single acting actuators
• Pneumatic double acting actuators
• Pneumatic rotary actuators
• Pneumatic Scotch and Yoke actuators
• Pressure: 228 bar
Temperature:
Standard -4°F to 200°F (-20°C to 93°C)
Low -40°F to 176°F (-40°C to 80°C)
High 0°F to 300°F (-18°C to 149°C)

Available materials: CF8M, CF8, SS316, CF8M, WCB, WC6, WCC, LCB, LCC, SS304, SS316, Cast Iron, Ductile iron
Class: 150 to 2500
Nominal Pressure: PN6 to PN450
Size: 1/2" to 72"
Ends: Flanged, Buttweld, Socket weld, Threaded, Wafer, Lug
Operation: Pneumatic Actuated
Standards: ASME, API6D, API607, DIN,BS, ANSI
https://www.specialityvalve.com/product-category/pneumatic-actuated-valves/