Contact
[email protected]
Phone -- 1-855-415-1535
Website -- http://www.rubber-deck.com/

If your pool is showing its age, it may be time to consider pool resurfacing. Your current pool may have cracks, blisters, or discolorations that a resurface will eliminate. Depending on how your pool is currently surfaced and what you need to put on it, this could be a simple or difficult DIY project. Here are a few facts to consider when resurfacing concrete pool deck toronto.

Topcoat Materials
If you have a gunite pool, your pool cover will be made of concrete that is 8-12 inches thick. A final finish will have been placed on the surface of the gunite. Standard finishes used are plaster, tile, Diamond Brite, or perhaps Pebbletek. This topcoat generally can last up to 15 years. Once you resurface your pool, it is this topcoat that is substituted.
Basic Process for Pool Resurfacing

While these methods won’t give you all of the information you need to completely resurface your pool, they make up an outline to enable you to consider whether you will be able to do this work yourself and what you should prepare for.

Disclaimer: Before beginning the process, you must contact your city’s planning department to see if you need a allow for resurfacing your pool or if there are any other special needs, like where to drain the water.
Step 1 – Draining and Cleaning the Pool
When resurfacing, you must first drain the pool.

Next, you should thoroughly clean the pool's area with a wire brush. In case you have plaster on gunite, you will have to use a chisel, pick, or jackhammer to remove the plaster from your gunite shell. Once you have removed all the plaster, use a wire brush around the shell to remove all of the chalky material around the shell.

The top should then be cleaned together with trisodium phosphate (TSP) and then a coating with muriatic acid to remove mineral deposits. End up being extremely careful when working with this acid, as it can damage your skin and lungs when inhaled directly. Always wear appropriate safety gear like gloves, shoes or boots, eye goggles, and sometimes a respirator. Finish simply by neutralizing the acid with TSP.

Step 2 – resurfacing concrete pool deck vancouver
Once your pool's surface is clear, the pool can be resurfaced by spreading plaster. For a pool with a hundred linear feet, it will take around 2, five-hundred pounds of plaster and 3, 500 pounds of white marble plaster sand to resurface the pool.

Types of Surfaces
The three most commonly used pool surfaces are plaster, pebble, and also quartz.
Pool Plaster
Generally, new gunite pools are coated with pool plaster, which is cement mixed with marble sand or perhaps limestone. It is the least-expensive option for pool surfacing and typically lasts around 7 years.
Pebble Coatings
Pebble finishes are performing just plaster with aggregate mixed, However, The addition of mixture makes these more durable and also stain-resistant than plaster only. Pebble finishes can be considerably rough and cost twice as much as plaster, but the upside is that they often last over 12 years.
Quartz Coatings
A quartz finish is a plaster with quartz aggregate mixed in. This provides more color than pebbles and is a more stain-resistant option. A quartz finish will usually last 12-15 years.
Fiberglass

Fiberglass swimming pools should be resurfaced together with fiberglass. Look for special kits that use a fiberglass resin and also a gel-coat to restore the finish to your fiberglass pool.
Should You Resurface Your current Pool Yourself?

The main drawback to making this a DIY project is that water is just not forgiving. If you make a mistake, you will end up left with a leaking pool and will have to do it again the entire process. As well as, a medium-sized home pool may generally take two people over 20 hours to resurface. In case you have a larger pool, it will often take three to four people to keep your plaster from setting too quickly. If this doesn’t interest you, consider hiring a professional to do the work.

However, resurfacing concrete pool deck Quebec City can be quite a rewarding task that may save you money. If you’re excited about resurfacing your pool and you’re willing to put in a bit of perform, there’s nothing that should stop you.

For more information about swimming pool deck repair Ottawa please visit the website here at http://www.rubber-deck.com/