In Industries Vibration monitoring plays a crucial role in both types of machines i.e dynamic and static.
Thus, the monitoring of displacement is critical for observing Vibration Analysis. The displacement can be:
1. Displacement of shaft from its axis
2. Rotational displacement
3. Radial displacement

Reckers Mechatronics provide solutions for Vibration or Condition Monitoring in India, Vietnam, Laos and Thailand. The level of Vibrations is noted carefully and can be compared with historical data to know the condition of machines.

The Vibration monitoring systems are used in the industries for the following reasons:

a. It helps to reduce the downtime of the process.
b. It helps to increase the life span of the machine.
c. Through Vibration Monitoring , one can opt for preventive maintenance so that the machine will not hamper in the performance of the desired processes.

Reckers Mechatronics has designed the system with which Real time monitoring of Vibration level can be observed. Our solutions are based with Allen Bradley, which provides World Class Automation Control Systems.

Here below mentioned are few Turbines mentioned in which Vibration Monitoring plays a vital role:

i. Power Turbines
ii. Thermal Power Turbines
iii. Hydro Turbines
iv. Heavy Blowers in Industries
v. Generators

Vibrations are measured in following terms:
1. Displacement
2. Velocity
3. Acceleration

Different sensors are used for this process like eddy current probes, voltage transducers etc.

When to use VMS?

There are Vibrations present in each and every machines and condition monitoring is required for preventive maintenance purpose. With Real time analysis of machines it becomes easy to observe the critical displacements in the machine.

With due course of time and usage of machines , there starts the changes in the condition of machines.

Preventive times starts when vibrations/ slight displacements are observed by Vibration Analysis.
Then after time gap excessive frictions can be observed which can be detected by oil analysis.

Then with due course of time if both the above mentioned symptoms are neglected, machine creates noise which is quite audible enough to know the deteriorating condition of machine.

After this, heat can be detected on the machine and then smoke can be seen which follows with shutdown of machine.

It is advisable for the Industries to monitor the real time status of machines to reduce the downtime and increase the productivity of the processes.

CONTACT : Gunjan Santia,
Inside Marketing Manager
COMPANY :Reckers Mechatronics Pvt. Ltd.
PHONE : 9212728006
EMAIL :[email protected]
For more information you can contact us at: www.reckersmech.com