If Acrylic bathtubs should happen to scratch or chip, the bathtub could be restored back into fresh. Just follow the recommendations below for cleaning and scratch repair.

How do I mend my acrylic bathtub?

Scratches and dulling can be eliminated with a liquid automobile polish or metallic polish and made to look like brand new.

Deep Scratches can be removed by use of rather fine damp sandpaper 1500 grit and then completing with a liquid gloss. When trimming make sure you use a little bit of water to avoid scratching the surface.

If your bathtub Is lightly scratched, you can buff it out with polishing compound. If the scratch is deep, it is possible to sand it down with a damp 1500 grit sand paper in a circular movement. Ensure you wet the sandpaper with water. Lastly, polish with polishing compound using a soft clean cloth using a modest amount of polishing compound. Repeat as many times required to eliminate the scratch. *** The use of a electric buffer may easy burn the surface in case your not experienced in the use of a buffer. If you don't have experience in buffing out scratches we would suggest that you practice on an acrylic surface that you don't mind burning differently perform the task by hand to become safe.

How do I clean my acrylic tub

Acrylic Bathtubs are a good surface material. The color is not painted on Instead it is part of the substance. The bathtub Is Quite easy to clean and maintain. We suggest that you use liquid dish soap as well as Windex will Work well. Using paint thinner or some other acetone to wash your bath Tub as this may damage your bathroom tub and void your warranty. For more info visit http://lenslite.com.mx/