Middleeast valve is the greatest Pneumatic cage control valve supplier in Lebanon. We supply to cities like Beirut, Tripoli, Byblos, and Sidon. It is a type of control valve that uses pneumatic actuation to control the flow of fluid in a process system. It typically consists of a valve body, a cage or plug, and an actuator. The cage or plug is positioned in the valve body and can move in response to the actuator's signals, allowing for precise control over the fluid flow.

The pneumatic actuator used in a cage control valve is typically powered by compressed air, which is supplied to the actuator to control the movement of the cage or plug. The actuator may use a diaphragm, piston, or other mechanism to convert the energy from the compressed air into mechanical force that moves the cage or plug, which in turn modulates the flow of fluid through the valve body.

The cage or plug in a pneumatic cage control valve is designed to fit within the valve body and can have various shapes and configurations, such as linear or equal percentage, to achieve specific control characteristics. The cage or plug has perforations or holes that allow the fluid to flow through when the valve is open, and the movement of the cage or plug determines the size of the flow passage and thus the amount of fluid that can pass through the valve.

Middleeast valve is a leading and renowned Pneumatic cage control valve supplier in Lebanon and are known for their reliable and accurate control performance, as well as their suitability for various process conditions and environments.

Advantages of pneumatic cage control valve:
1)Precise control
2)Fast and responsive
3)Reliable
4)Simple and cost effective
5)Safety and control options

Industries which use them:
1)Oil and gas Industry
2)Power Generation Plants
3)Chemical Processing Industries
4)Water treatment Pants
5)Automotive Industries
6)Marine Industries

Description:
Body Material: Cast iron, Ductile iron, Carbon, Stainless steel, Bronze, Aluminum
Size: The size of the valve is also determined by the connection size, which can vary from small pipe size (1/4" to 2") to large pipe size (10" and above).
Ends: Flanged, butt weld, socket weld, threaded

Configuration of a Pneumatic Actuator:
1)4-20 amp
2)Pneumatic single acting actuators
3)Pneumatic double acting actuators
4)Pneumatic rotary actuators
5)Pneumatic Scotch and Yoke actuators
6)Pressure: 228 bar

Temperature:
1)Standard -4°F to 200°F (-20°C to 93°C)
2)Low -40°F to 176°F (-40°C to 80°C)
3)High 0°F to 300°F (-18°C to 149°C)

Visit us- https://www.middleeastvalve.com/product-category/pneumatic-cage-control-valve/