Kelowna furniture requires maintenance and care. Kelowna furniture care will depend on the type of finish on the wooden furniture. It’s the finish type that determines the type of cleaning on the wood. The finishes vary depending with tastes and preferences of an individual.

Finishes on Kelowna Furniture are classified into three groups: painted, soft or hard finishes. Soft finishes are usually Tung or Dash Oil while hard finishes may be polyurethane or lacquered.

Cleaning will usually start with testing on an inconspicuous area. If your Kelowna furniture is new and you have no idea the type of finish it has, this caution will save you refinishing tasks and furniture damage.

Painted Finishes on Kelowna Furniture
Paint is usually a hard wearing surface. Sunlight alters how a painted surface looks. Avoid prolonged exposure. Natural wood will undergo aging changes that leave the furniture looking beautiful. Regular dusting and care is required to maintain this beauty.

Soft Finishes on Kelowna Furniture
Soft finishes on Kelowna furniture such as Tung or Dash oil requires the use of such a solution as gum turpentine. The surface is usually wiped with a cloth that has been dipped in such a solution.

Hard Finishes on Kelowna Furniture
Polyurethane finishes fall under the hard finishes category. The finish is preferred for its resistant nature to spills and moisture. The finish also stands well against moderate heat when compared to traditional varnishes.
Lacquer is hard and glossy. It is also brittle therefore it is prone to dents and chipping. This finish on Kelowna furniture does not respond well to water. Avoid water as much as possible.

Care for wooden Kelowna Furniture can come in several forms. It can be the daily dusting or the occasional detergent application to wipe off years of accumulated grime on your wooden furniture. Here’s cleaning explained:
• Dusting
Dusting should always be done on Kelowna Furniture in the direction of the grain. The distinctive pattern of the wood is held on to for years with this practice. This maintains the quality of furniture in the long run. Dusting should be done with a soft clothpreferably made of microfibers in order to remove the dust without shifting it elsewhere.
• Polishing/Waxing
There are a variety of polishes. They should not be mixed because each has its own properties that work best for a certain surface. For instance, beeswax polish should be used on surfaces without lacquer. This is because lacquer prevents beeswax from penetrating the surface. Hence, there is no need of layering such a surface with another extra layer.
Finish feeder is usually used to brighten dull finish. It is used on any penetrable finish and leaves a glossy attractive look on your furniture.
• Refinishing
Refinishing is similar to waxing but you have to rub the surface of the furniture to make it coarse in order to take up the wax. It involves leaving abrasions on a surface that enables the deep penetration of wax or polish. It is done when you can no longer appreciate the beauty of your Kelowna furniture.


More info about furniture kelowna visit . http://kelownawallbeds.com/care-wooden-furniture/