Cable pulling equipment helps underground cable installers pull cables through multiple bends. This type of equipment is particularly useful when cables are buried underground. The cable puller is versatile enough to work with copper, aluminium, and fibre cables. Know more about cable pulling tools.

There are three main types of cable pull devices:

• Pull the grip: Helps the contractor reduce the risk of getting caught during installation and removal of underground cables.

• Support Grip: A disposable tool that supports the weight of cables used in vertical and inclined travel.
• Strain relief device: bend the cable in turn before installation and remove the over-bent damaged electrical cable.

Pull the cable:

Cable extraction is one of these important tasks, and more and more fibre optic cables and network connections are required, especially as technology advances and expand.
Pulling the wire is a big part of being an electrician. It may seem like a fairly basic process for your day. However, if no appropriate action is taken during the pull, it can mean a wire that needs to be replaced due to loss of time, loss of patience, and possibly damage due to a pull failure.

Types of cable pulling:
Pull the conduit:
When installing or rewiring different types of wires, such as wires, speaker wires, telephones, internet cables, etc., it is often necessary to route new wires through existing conduits or pipes. Looking for Cable Pulling Winch Manufacturers

Cable installation:
To install a new cable on the ceiling of a facility such as a hospital or clean room, you need to pull a different type of cable. The best way to ensure the cable pulling process is smooth is to use the right tool. In this case, it can be a cabled access point.

Pull a large cable:
Larger cable drawing projects are particularly common in new construction projects. These may include cable bundles, conduits, or any other difficult materials, but because the cables are installed in an unfinished building, access to the ceiling is usually not necessary.

Cable pulling lubricant types:
Currently, below types of cable pull lubricants are on the market. These are the majority types of products sold in the market.

1. Wax-based lubricant is a stabilized water-in-oil emulsion. They have a very low coefficient of friction and are ideal for pulling very long cables (over 1,000 feet). However, the time required for 100% evaporation of the water component is also very long. Most of us know this type of lubricant as “Yellow 77”.

2. Polymer-based lubricants are gel matrix compounds that contain various amounts of acrylic acid polymers, along with various hydrocarbon lubricant systems. For example, glycol, quaternary, detergent, soap. Cold-resistant polymer-based lubricants are heavily loaded with propylene (or ethylene) glycol, which remains liquid at low temperatures and has a very long drying time. Some cable pulling lubricants have very fast drying time. Cable Puller Machine

Tips for pulling wires:

The most important things to remember when preparing a wire pull, big or small.
1-pull evaluation to prove your conduit.
2- Clean the conduit entrance and exit.
3-Provide proper lubrication.

https://www.aacess.com/cable-pulling-winch-manufacturers