Computer Numerical Control or the CNC wood router is a machine for cutting the rotation speeds in iron and metal working machinery. It is similar to the CNC milling machine, and this metal working machine contains a router within the machine. This wood router is being managed and used in the same way as the metal mill can do.

Here are the several kinds of CAM and CAD software:

• Bob CAD
• Art CAM
• Master CAM
• Feature CAM

Wood that contains different grain or fragments must be applied.

Exclusive techniques or strategies must be applied to wood that contains dissimilar grain or fragment. Wood soft wares are like CAM. Wood routers are used extremely in machine and other diverse materials, because they are soft just like plastic materials.

In general, CNC wood routers are the biggest in terms of metal working; it is usually doubled in bed sizes that are used for the machine. It can also build and accommodate large sizes that is about 12'x100' in size. It is specialized and run with three motor drive system that stands for the X, Y, and Z axis that are used for the drives of the router motor machine through the scaffold system. The scaffold system separates the X, Y, and Z axis or it separates the three motor drive system. In fact, there are lots of CNC metal mills that contains a cutter motor that moves in different alignments. The X and Y with the tables moving will sustain its immovability.

Moreover, several wood router works at maximum speed at about 25 meters per minute and as fast as the other machines with the capacity of 40 meters per minute to 80 per minute. On some cases, other wood routers have double separate top that can continually move downward but sometimes it does not. However, it is easier to maintain, and it can disconnect the programs on a detached table while being prohibited by the same boundaries.

The wood router absolutely has 6"-10" air channel to suck up the wood that is being created, they can be a tube to stand by itself. It is being organized for cabinetry that contains drills that can work to program them separately. This thing is for the appropriate spacing or they are being placed on to hold together the cabinets. In drilling purposes, it can be horizontal or vertical and it permits a board to be drilled. It is by point borers in CNC machines that are larger in size.

For these reasons, the machine has its own original purpose and they are to clutch wood going up or hold down the pod for the work functions.