The oil absorbent pad shall not be discarded at will after use. The oil absorbent pad that is still in solid state after use can be handed over to the factory or environmental protection department for treatment; The oil absorbent mat that cannot be recovered can be mixed into coal in the proportion of 5% - 10% to be used as boiler fuel. Moreover, the gas generated by the burning of oil absorbent pads does not harm the waste gas, and the ash content after burning is less than 0.02%. Hopetopway oil absorbent pad is made of 100% polypropylene fiber material, which does not contain any chemical components and will not cause secondary pollution to the environment. It has strong oil absorption performance, can quickly adsorb oily liquid, and the weight of the adsorbed liquid is more than ten times its own weight. Oil absorbent pad is a good oil cleaning equipment. After surface burning or composite treatment, ordinary oil absorbent pad can also be used as paving material for special industrial channels.

Here is the contene list:

● Basic characteristics and parameters of oil absorbent pad.

● Why use oil absorbent pad?

● Why are there so many cheap oil absorbent pad on the market?

Basic characteristics and parameters of oil absorbent pad.

1. The oil absorption capacity of oil absorber pad is large (10 to 20 times of self weight).

2. Oil sorbent pad absorbs oil quickly (in minutes).

3. Oil absorber mat can be suspended and is suitable for industrial or offshore use.

4. Oil absorbent pad is clean, light and fast.

5. After adsorbing the leaked liquid, the oil sorbent mat can be reused after extrusion to save money.

6. Absorb mat is not prone to chemical reactions (chemical resistance).

7. Oil absorber pad will not deteriorate, safe and environmentally friendly, and does not support combustion.

8. Oil absorbent mat can be incinerated or mixed with fuel, and only 0.02% of ash is incinerated at high temperature.

9. Storage requirements of oil sorbent pad - keep away from moisture, open fire and heater

10. Stability of oil absorb mat - stability.

11. The automatic ignition point of oil absorbent sorbent pad ---- 441 degrees Celsius.

12. The melting point of oil absorbent pads ---- 149-204 degrees Celsius.

Why use oil absorbent pad?

● Oil leakage will cause waste of oil, affect the economic benefits of enterprises, pollute the environment and seriously endanger personal safety. Regardless of the size and scale of the oil spill, the oil spill constitutes a safety risk, environmental risk and raw material pollution risk. Leakage is also likely to cause legal problems (OSHA, EPA, FDA, USDA).

●Oil absorber mat can quickly absorb oil stain, organic solvent, hydrocarbon, vegetable oil and other liquids dozens of times its weight, and does not absorb water. It is widely used to remove the oil slick on the water surface and wipe the oil stain of machinery and equipment.

● Oil absorbent pads can be used to remove and wipe a large amount of oil stains such as battery, ship belly and sedimentation tank, recover and treat oil spills on the sea, and prevent the spread of oil spills such as oil truck, oil tank, oil tank and oil barrel.

Why are there so many cheap oil absorbent pad on the market?

1. The oil absorbent pad produced by hopetopway uses 100% pure polypropylene as the raw material. Many factories in the market will add a certain proportion of calcium carbonate in the production process in order to reduce the product cost.

2. The oil absorb mat added with calcium carbonate will have much lower oil absorption capacity than the oil absorbent mats produced with 100% polypropylene pure material, which will increase the cost of end customers.