Automatic blow molding machine operating procedures :

1. Without trained personnel to prohibit the operation of the automatic blow molding machine.

2. Before turning to ensure that the machine connected to ground zero, to avoid leakage caused by unsafe accident.

3. For small blow molding machine , before heating should check each part of the cooling water is turned on carefully.
4.Before running blow molding machine platform rose a suitable location to ensure that the head of the template without collisions, to avoid damage to the equipment.

5. The machine pressure system has been set at the factory and can not be adjusted in the absence of exceptional circumstances, to avoid the pressure is too high or too low, resulting in damage to the hydraulic system or affect the normal operation of the machine.

6. Workers were forbidden on the machine loading, avoid electrical shock or burns and falls from a height. (Blow molding machines should be equipped with automatic loading device).

7. During the opening and closing operation shift mode of blow molding machine, the operator is prohibited to enter the security gate area to avoid being pinched or bruised.

8. Blow molding machine in the normal operation of production, do not use hand to snap is out of billet, avoid high temperature materials and keen knife burns or by mold task.

9. In adjusting shift mode, when the mold photoelectric switch, be sure to turn off the main oil pump of blow molding machine, avoid unsafe incidents.

10. In case of emergency of blow molding machine, press the red stop button quickly to prevent accidents.

If you have any questions about the blow molding machine, welcome to contact Qingdao Great Machinery Co., Ltd, we are specialized in water tank machinery for water tank, pallet, road barrier , we are glad to help you for further.
http://www.blowingmachinery.com/