Aarkstore announces the publication of its Research Report “Fiber Optic Component Attenuators Global Market Forecast”

This is the ElectroniCast worldwide market forecast of the consumption of component-level fiber optic attenuators in communication applications. The optical attenuators, which are covered in this study, are components used to control (reduce) the power level of an optical signal used in optical fiber communication networks. Fiber optic attenuators are an important part of the optical communication link by allowing the adjustment of signal transmission into the dynamic range of the receiver. Either a fixed or variable attenuator is generally positioned before a receiver to adjust optical power that otherwise might fluctuate above an extreme range of the receivers design, causing it to generate errors.

Fixed-type (not adjustable) fiber optic attenuators refer to the attenuator that can reduce the power of fiber light at a fixed value loss, for example, 5dB. While variable fiber optic attenuators refer to the attenuator that can generate an adjustable Loss to the fiber optic link. Fiber optic attenuators can be designed to use with various kinds of fiber optic connectors. The attenuators can be female-to-female, which are referred to as bulkhead- types; or male-to-female, which are referred to as plug-types. In-Line fiber optic attenuators are designed with a piece of fiber optic cable at any length and/or connectors.

Variable optical attenuators (VOAs) are either manually adjustable or electronically adjustable. VOAs have been widely used in fiber-optic communication, optical signal processing, fiber optic sensing as well as testing instruments.

This report quantifies stand-alone component-level fiber optic attenuators, as well as component-level fiber optic attenuators that are inside value-added or integrated modules. However, only the fiber optic attenuators are counted, not the entire value-added module.

When counting (quantifying) variable optical attenuator array modules and integrated modules, which may have more than one component-level attenuator, each component-level attenuator is counted separately. For example: with an integrated value-added module, we count only the complete (component-level) fiber optic attenuator as well as cost-adjusting for the optics, optical fiber alignments, and optical fiber and associated packaging, and other required materials.

Typically, fiber optic attenuators have used filter technology to decrease optical power. Light is usually transmitted from one fiber, through a spatial or temporal filter, and then focused into a second fiber for transmission through the balance of the optical links. Some of the other methods include angular (APC), lateral or axial displacement of two fiber ends, grayscale (neutral density) filters, fiber macro-bending, liquid crystals, PLC, MEMS, magneto-optic, acousto-optic or electro-optic.

Fixed attenuators (not adjustable) afford the network designer an inexpensive lumped element to decrease optical power. Packaged in either panel mount or cable assemblies, fixed attenuator types include bulkhead, connector build out, jumper/pigtailed and in-line. Attenuation is often segmented into whole decibel increments such as 1dB, 3dB, 5dB, 10dB, 13dB, 15dB and 20dB. Fiber attenuators are often associated with a connector-type, such as: LC, SC, ST, FC, MU, SC/APC, FC/APC, and other, as well as optical fiber-type (single mode and multimode).

Variable (adjustable) attenuators are ideal for simulating cable loss for research and development (laboratory) testing of optical communication link power limits or reducing power in the links where receivers are in the process of being overloaded. Fixed in-line (cable assembly/jumper) attenuators can distinguish the color band coding process to simplify the specification identification of the optical communication link components during field installation, stocking, or maintenance operations. VOAs (variable optical attenuators) enable adjustment capabilities, so the injected loss may be simply reduced as specific components degrade and increase their own attenuation over a few years.

The variable optical attenuators (VOA), also known as variable fiber-optic attenuators (VFOA) is a basic building block for several optical systems such as wavelength division multiplexed (WDM) transmission systems, optical beam formers, fiber-optic adaptive controls, and other applications.

The market data are segmented into the following geographic regions, plus a Global summary:

America (North, Central and South America)
EMEA (Europe, Middle Eastern countries, plus Africa)
APAC (Asia Pacific)
In this report, the fiber optic attenuator market is also presented by the following product categories:

Fixed
Bulkhead/Plug/Panel Mount
In-Line Jumper
Variable (VOA)
Manually VOA
Electronically VOA (EVOA)
MEMS-Based EVOA
Other EVOA
The worldwide market forecast of the consumption of fiber optic attenuators is segmented into the following communication applications:

Telecommunications
Private Data LAN/WAN
Cable TV
Military/Aerospace
Specialty
Below, are three levels (or "food chain") pertaining to the fiber optic attenuator marketplace. For the purposes of this ElectroniCast study, we quantify and provide a market forecast for "Level 2"

Level 1 - The chip, die
Level 2 - The Component-Level fiber optic attenuator
Level 3 - Module (array attenuators, integrated modules, other)

INFORMATION BASE

This study is based on analysis of information obtained continually over the past two decades, but updated through early-October 2016. During this period, ElectroniCast analysts performed interviews with authoritative and representative individuals in the fiber optics, telecommunications, datacom, cable TV and other communication industries, from the standpoint of both suppliers and users of fiber optic transmission links. The interviews were conducted principally with:

Engineers, marketing personnel and management at manufacturers of fiber optic attenuators, circulators, collimators, specialty fiber, connectors, isolators, couplers, DWDM filter modules, dispersion compensators, photonic switches, modulators, transmitters/receivers, OADMs and other related optical communication components.

Engineers, marketing, purchasing personnel and market planners at major users of passive and active optical components, such as telecommunication transmission, switching, distribution and apparatus equipment, telephone companies, data communications equipment companies, cable TV system suppliers, and a number of other end users of fiber optic communication components and technology.

The interviews covered issues of technology, pricing, contract size, reliability, documentation, installation/maintenance crafts, standards, supplier competition and other topics.

To view Full Report: http://www.aarkstore.com/electronics/117548/fiber-optic-component-attenuators-global-market-forecast

A full review of published information was also performed to supplement information obtained through interviews.
The following sources were reviewed:

Professional technical journals and papers; Trade press articles

Technical conference proceedings
Additional information based on previous ElectroniCast market studies, including the Fiber Optic Forecast Service Data Base, the Fiber Optic Cable Forecast, the Optical Amplifier and Component Global Forecast, the Fiber Optic Installation Apparatus Forecast, the Fiber Optic Circulator Forecast, Fiber Optic Coupler, Isolator, Filter, DWDM, Switch, Optical Add/Drop Multiplexers, Transmitters/Receivers, SONET/SDH, and other related component Market Forecasts

Personal knowledge of the research team
In analyzing and forecasting the complexities of the Global market for fiber optic communication components, it is essential that the market research team have a good and a deep understanding of the technology and of the industry. ElectroniCast members who participated in this report were qualified.

Get Sample Request @ http://www.aarkstore.com/sample/117548

Table of Contents
1. Executive Summary
2. Fiber Optic Attenuator Market Forecast
3. Fiber Optic Attenuator Competitors and Related Entities
4. Fiber Optic Attenuator Technology Review
5. Optical Communication Trends
6. Methodology
7. Definitions - Acronyms, Abbreviations, and General Terms
8. Market Forecast Data Base - Overview and Tutorial

More Related Reports @ http://www.aarkstore.com/technology/electronics