The MJF technology 3d printing is a well-known and highly beneficial printing process that enables the building of prototypes and end-use parts. The process is impeccably rapid, which becomes one of the most fundamental reasons for its widespread use and popularity.

It is essential for you to know the working process of MJF technology 3d printing. The following steps can help you with their steps of working.

The build unit, which is mobile, is put into the multi jet fusion 3d printer.
The material recoater carriages travel across the entire area of the building. And as it does so, it deposits a thin layer of powder.
The Multi jet fusion and printing carriage travels throughout the build area, preheating the powder to a particular temperature. Therefore, it offers material consistency.
A series of inlet nozzles integrates agents on the powder bed in those areas that correspond to the geometry and properties of the parts.
After every layer is completed, the build unit withdraws to form a space for the following layer of material to be deposited.
The same procedure for multi jet fusion 3d printing keeps on being repeated until the compilation of the build process.

Final Words

After completing the MJF technology 3d printing, the build unit consists of the printed part and the powder that has not been fused. Here, the ultimate goal will be reached when a separate processing station is used to cool and unpack the part. And therefore, with that, recover the excessive powder for further future purposes.

Facfox
Email:- [email protected]
phone no.:- +86-0571-2990-3213
Website:- https://facfox.com/service/mjf-3d-printing-service/