FAG bearing temperature, generally bearing chamber outside temperature can be inferred that if the use of the hole can be measured directly FAG bearings outer ring temperature, it is more appropriate position. Typically, FAG Bearings with bearing operating temperature slowly began to rise 1-2 hours to reach steady state. The normal temperature of the bearing due to heat capacity, heat capacity, speed and load of the machine and different. If the lubrication, install the appropriate department, the bearing temperature will be rapid-rise, there will be abnormal high temperature, when to stop running, take the necessary precautions. You can always use the thermal sensor monitoring FAG bearing operating temperature, and to achieve the temperature exceeds a predetermined alarm or stops to prevent burning shaft accident value. FAG Bearings high temperature frequently expressed in unusual circumstances. High temperature is also harmful to the bearing lubricant. Sometimes bearing overheating can be attributed to the bearing lubricant. If FAG bearing temperature over 125 ℃ even move to reduce long-term bearing life. FAG Bearings high temperature causes include: lack of lubrication or over lubrication, lubricant. Contains impurities, the load is too large, the bearing ring damage, lack of space, and high-friction seals and so on. Therefore, continuous monitoring of FAG bearing temperature is necessary, FAG Bearings whether measuring the bearing itself or other important parts. If you are under the same operating conditions, any change in temperature may indicate a fault has occurred. Regular amount FAG bearing temperature measured by means of a thermometer, such as digital thermometers, bearing temperature can be accurately measured and given in accordance with ℃ or Fahrenheit units. The importance of FAG Bearings, which means when it is damaged, can cause equipment downtime, so the best type of bearing temperature detectors should be installed. Under normal circumstances, FAG bearings lubricated or just after the re-lubrication will naturally rise in temperature and continue one to two days. Generally, the bearing operating temperature at 150 ° or more is called high-temperature bearings, since the temperature exceeds 150 °, its hardness will be a sharp decline in chromium bearing steel, dimensionally unstable, so that FAG Bearings is not working properly. So for FAG bearing operating temperature at 150 ° to 350 ° conditions of work, if the rings and rolling elements still use an ordinary high carbon chromium bearing steel, you must FAG bearing parts special tempering process, it should generally be higher than operating temperature 50 ° under tempering. After bearing steel tempered as above, it can be used in the normal operating temperature. But the hardness after tempering declined somewhat, FAG bearing life decreased.

http://skfbearing-china.com/
Tel:00852-55143810
E-mail：[email protected]

http://www.bearing-china.cc/