In the event you happen to be thinking about getting a brand new boiler installed because the existing one is on its final legs, then you will find a handful of factors it is best to contemplate. I have listed a number of ideas beneath to steer you around the proper path.



The initial point you have to do is contact a local gas safe registered particular person or company to carry out the work for you, when the boiler engineer arrives at your property ask him to show you his gas safe card, verify the card is in date and features a picture from the engineer around the front, then turn the card more than to determine if he's registered to install boilers. If he cannot show you his card then you really should ask him to leave your property.



The law states only gas safe registered people can work on gas appliances and must constantly carry their gas safe card with them.



Subsequent the boiler, do you need the exact same heat output? Do you will need a larger one?



Try to find out what your current boilers heat output is, typically it is printed on the case, it may very well be around the front panel or perhaps positioned underneath, this can help you in deciding what boiler size you will need.



Do you intend inside the future to extend your property? In that case, then you definitely will adequately have to have a bigger boiler to cope using the extra demand. The typical combination boiler comes in numerous sizes, probably the most well-known one getting a 24KW. This one is best for those who live within a flat or little house. It will provide you with continuous hot water and will heat about 10 radiators comfortably. The hot water will make about 10 litres per minute, really should you want a larger output then its worth taking into consideration going for a bigger size. Do some analysis around the new boiler that interests you, discover as considerably as you could on the boiler, then evaluate it with some other tends to make. Try not to invest in the cheapest one, ask your engineer for advise on what new boiler is most effective for you.



The new boiler location may well should be changed in the existing one due to gas regulation changes over time. To help keep the installation fees down it can be far better if doable to install inside the exact same location because the old one.



Your new boiler will have to have a condense drain pipe fitted and this has to exit into a drain, internal is preferred but if not feasible then it may exit to an outside drain, however it ought to be protected from the cold climate and not be permitted to freeze, ought to this occur the boiler will quit operating.



In case your boiler is over 10 years old then the chances are the gas supply is going to be too modest for the new boiler, this may have to be upgraded, commonly to a 22m size. This will add an added price to the installation.



Whenever you possess a new boiler installed you ought to contemplate upgrading your current controls, you will find a lot of to select from and they are all developed to save on your energy bills.



All boiler makers now advise that you are heating system is flushed out and cleaned to get rid of any sludge and debris, should really this not be carried out the new boiler warranty could develop into void, so be certain the system get flushed out.



The most effective tip I can provide you with is speak to your local gas safe boiler engineer, he are going to be able to advise you on what's the ideal boiler for your property.



I do hope these strategies help you come across the correct new boiler for your property.