Diesel injection pumps for sale are a full-service diesel fuel injection business. That means they can repair, rebuild, or replace almost all diesel injection pumps, diesel injectors, and turbos that are out there. They will inspect your pump, injectors, or turbo, and then provide an estimate to repair, rebuild, or replace your component. They also offer remanufactured exchange units as well as in house rebuilt exchange units. They stress quality parts, repair, and service.

Diesel Injectors

There are some common repairs needed on specific engines that are easy to do, but that does not mean everything else will be easy to diagnose. Owners often think that because diesel engines are now computer-controlled, the technician should be able to hook up a scan tool and immediately see what is going on. The good thing about electronic diesel is that the technician can link up with a scan tool to analyse data in order to try to pinpoint problems. But some problems may be tougher than your customer — or you — think. Take the diagnosis of an injector issue. Even though they are electronic, sometimes the mechanical components inside the injector may also become worn, cease to function properly, and even fail. In cases such as these, the scan tool generally will pinpoint the cylinder with the contribution problem.

Injection Pumps

Your pump or injectors will be put in our parts cleaner and the exterior will be cleaned. After coming out of the cleaner, your unit will be disassembled and examined for wear by one of our factory-trained fuel injection technicians. They will then generate an estimate for repair options. Once you give us the ok for repairs, they proceed to the process of cleaning the internal parts and removing any old paint down to bare materials. Pump or injectors are disassembled completely. Components that will be reused are completely cleaned and inspected, and worn parts are replaced with new OEM parts. They cannot stress the importance of using genuine factory parts. Pump or injectors are then rebuilt on a bench to factory specifications. The pump is rebuilt, calibration is checked by running it on one of their fuel injection test stands.

Turbochargers

A turbocharger, (or turbo), is a turbine-driven forced induction device that increases an internal combustion engine’s efficiency and power output by forcing extra air into the combustion chamber. This improvement over a naturally aspirated engine’s power output is due to the fact that the compressor can force more air—and proportionately more fuel—into the combustion chamber than atmospheric pressure alone. The objective of a turbocharger is to improve an engine’s efficiency by increasing the density of the intake gas (usually air), thereby allowing more power per engine cycle.

They have state of the art equipment to bench test and calibrate your diesel injectors and diesel injection pump. The service for more than 35 years. You can be assured their rebuild service meets all factory specifications and is calibrated to all factory settings.

Visit us at https://www.dieselinjectionspecialist.com/. You can even try to call us at 407-290-1474. So, make sure that you avail of our services in the best manner without any worry where you can even try to email us at [email protected] as well.