In order to make clear and clear line alignment at much longer work distance, although it is full of challenge for users, however, it is not the end for users until getting the chance to use a 100mW 532nm green line laser module. It is an advanced 532nm green DPSS laser tech applying device. When it makes the best use of glass coated lens with different fan angles and good thermal emitting system, after production into a laser line generator, it is able to work with the best quality green laser light source emission, and extremely fine and clear green line alignment in distance and high lighting occasions.
Comparing with a simple manual line printing tool, such as a simple square meter or blocking board, it is always operating with serious limitation of manual operation, which is not able to avoid mistake in real line measuring work. After the use of 100mW 532nm green line laser module and correct use of 9V 1000mA DC power supply, it is generating highly visible green laser beam at several miles far away, but also projecting fine and straight green reference line at quit long work distance of 25 meters. Although it is projecting the most visible green laser beam, unless it is pointing under sunlight, it is still able to work with quite satisfied line positioning result under high lighting as well.
Under operation with constant line measurement onto various working surfaces, 532nm 100mW green line laser module would have to work with different line lengths and line fineness onto different work surfaces. The selection of glass coated lens enables high transmittance green laser light emission, and high linear quality green line projection at great distance. It is pointing onto different work distances, while still have to work with good laser beam stability. When this laser line generator passes through quite strict laser beam stability tests up to 24 hours, only if it is keeping work within 8 to 10 hours per day, it is always maintaining good performance and extremely clear green line alignment in continuous use.
In various industrial and high tech line measuring work fields, 100mW 532nm green line laser module enables freely selected optic lens degree of 10 degree to 110 degree. It is generating various line lengths of 0.5 meter to 6 meters. Only if this alignment laser selects correct optic lens degree, it makes quite satisfied line measuring results for all industrial and high tech line measuring works. At the same time, after high attention to any laser safety issue, wearing correct laser safety goggles, it makes sure of easy, and no mistake line alignment in all occasions perfectly.
view more: http://www.berlinlasers.com/532nm-green-line-laser-module