According to Hydraulic Fittings Company , the hydraulic hose is composed of three layers, which can maintain a stable flow of fluid and handle the pressure it bears while preventing wear and abrasion. These layers include: protective outer layer. The top layer is a rigid material that can resist wear, oil, water and other environmental factors. Reinforcement layer This is the protective layer covering the inner tube. It consists of one to several wire sheaths, which can be coiled or braided to protect the hose from tearing.

The inner tube is designed and manufactured by synthetic rubber, thermoplastic or PDFE. The hose design must be compatible with the application, which will allow for low or high pressure. Hydraulic Hose Compatibility When a hydraulic hose is assembled correctly, it can operate flawlessly in a variety of applications. However, some practices that weaken the hose and shorten the service life,

When the pressure of the hose exceeds these standards, it will cause failure and shorten the service life. In the hydraulic system, it is not compatible with the assembly of accessories, mixing hose types, and not reducing the hose according to the manufacturer's instructions.

Hydraulic hoses can withstand kinks, wear, pull and twist. By matching the hose to the contour of the hydraulic press and considering other obstacles, it should fit snugly without causing damage. Hose structure type When selecting the ideal hydraulic hose for the application, reinforcement is an important part to consider. The suction hose should be able to withstand high-pressure hydraulic fluid without failure. Good reinforcement can handle shocks, pulses and conventional loads in hydraulic equipment.

Through the above introduction,Hydraulic Adapters Company hopes that you can simply refer to the content of this article in future use.

https://www.cnshunda.com/