Solutions for Common Water Heater Problems


Posted April 27, 2018 by brycoplumbing

Different types of water heaters are available which people use. We face some common problems linked to different water heaters. Troubleshooting is the only option to eliminate the problem.

 
We will discuss common problems associated with water heaters and their solutions. Starting with electric water heating problems, leakages are a very common problem in the electric heater. In case, water is leaking from the upper part, then, there can be different factors of it. Check the cold inlet and hot outlet pipes. Due to the loose inlet and outlet pipes, water starts leaking. Failure of the temperature and pressure valve also leads to the leakage. Tightly screw the inlet valve to stop the leakage. In case, you are failed in evaluating the desired problem and find difficulty in finding the desired solution, then you can contact the experts of water heater repair los angeles who can solve any type of water heater problems. If the water is leaking from the bottom side of the electric heater, then this can be the effect of the normal condensation. The small amount of water is discharged from the gasket and the leakage occurs from the overflow pipe. This is caused because of the relieving of the excessive pressure and temperature from the temperature and pressure valve. Leaking of the actual tank is another cause of this problem. If the case is leaking, then we need to replace the whole water heater. This is the only solution. No hot water is another problem. Generally, water heaters contain two heating elements. Failure of the circuit breaker can be the cause of this problem. So, we need to check the breaker box. If the circuit breaker is fine, then check the heating elements. Sometimes, heating elements get failed in producing the desired amount of hot water. In case of the failure of heating elements, you need to replace the water heater. The problem with the limit or reset switch on the thermostat can be the cause of this problem. The high temperature of the water can cause the failure of the limit or reset switch. The replacement of the heater is the only option.

In some problems, water does not attain the desired temperature of water resulting in less hot water. Usually, the problem in the thermostat is the main cause of this problem. By adjusting the thermostat for the specific heating element, we can correct the problem.The electric heaters contain the panel. The thermostat is fixed on the side of the panel, covered with the insulation. If you are getting too much hot water from your heater, then adjust the thermostat. Temperature-related problems are a direct result of the thermostat. Professionals easily solve common problems of the water heater.
-- END ---
Share Facebook Twitter
Print Friendly and PDF DisclaimerReport Abuse
Contact Email [email protected]
Issued By Bryco-Plumbing
Website water heater repair Los Angeles
Country United States
Categories Business
Tags water heater repair los angeles
Last Updated April 27, 2018