5 Important Checks to Maintain Your Aluminium Boat Trailers Condition


Posted May 30, 2014 by boataluminium

If you have recently purchased a boat, then you will possibly have also bought boat trailer parts and a trailer to take it to and from the water. Hopefully, you have received a good counsel about the maintenance of the boat.

 
If you have recently purchased a boat, then you will possibly have also bought boat trailer parts and a trailer to take it to and from the water. Hopefully, you have received a good counsel about the maintenance of the boat, but many people forget that the trailer will need maintenance too. Below are few suggestions keeping good maintenance that you should carry out on your boat trailer.

Wheels

Your trailer will be driving into water at least two times every time you take it out, and the wheels will indispensable be taking a dip. Make sure that you grease the wheel hubs after each couple of trips, otherwise they will dry out and cause problems later. Purchase a grease gun, and use it on every nipple you see. If you utilization Marine grease it will be better, as it is designed with salt water in mind.

Tyres

It should go without saying that you need to check on tyre pressures and prerequisite. If you have a crack, you risk losing your boat, and your car. This is such an easy thing; you would be crazy not to do it. Search the manufacturer's recommended tyre pressures and stick to them.

Brakes

The trailer brakes can take a lot of the workload from your car's tract, so make sure they work well. Pads, disks, and drums, will also need check up. If you don’t feel you can do these yourselves, have a professional look at your brakes for you.

Lights

Make sure that the lights are working appropriately. Have a friend look at your lights while you operate the brakes, with your trailer connected to your vehicle. This is another simple check that many people negligence. If the lights are not working, have them fixed instantly.

Welds

If you have welds on the trailer these will require careful attention. Look for any bubbling paint, and tap the welds with a hummer. If you doubtful rust, then treat with a rust eating agent immediately and use a high quality paint to cover any bare metal. As soon as possible have the weld looked at by a welder, a professional will be able to tell you if anything ahead work is needed on the weld.

These tips will help you keep your trailer running for a long time; but remember, if your trailer is steel, you will require to be constantly looking for areas of damage and rust.

One can purchase a boat trailer made of different materials, but the trailers made out of aluminium are the most durable and highly anti-corrosive. Get in touch with savagetrailers.com.au, suppliers of aluminium boat trailers in Melbourne.
-- END ---
Share Facebook Twitter
Print Friendly and PDF DisclaimerReport Abuse
Contact Email [email protected]
Issued By Aluminium Boat
Website aluminium boat trailers
Phone 0397082970
Country Australia
Categories Automotive
Tags aluminium boat trailers , boat trailer parts
Last Updated May 30, 2014