Cable wire recycling machine is a kind of machine stripping the plastic coving the wire from the metal core. Due to the diversity of the diameter, species and composition of wires, there are different models of cable recycling machines meeting your requirements, such as short fine line type, big square type, row line type and coaxial type. As people of many regions are relying on a variety of machinery automation, cable recycling machinery is widely used in the machinery industry and playing more and more important role in helping production.




Cable recycling machine is used for the crushing of scrap copper wire and the separation of crushed copper and plastic. Cable recycling machine belongs to environmental protection machinery. The following are the basic parts of cable recycling machinery:

1. Pressure adjustment knob for entry capstan: Adjust the pressure of entry capstan. Clockwise swire the knob, the pressure increases, or it will decrease. It is up to the degree of difficulty of stripping wires. If it is difficult, you need to increase the pressure; on the contrary, you need decrease the pressure.

2. Pressure adjustment knob for exit capstan: The operating principle of it is different from the pressure adjustment knob for entry capstan. Anticlockwise swirl it, the pressure increases and clockwise swirl it, the pressure decreases.

3. Cutter assembly: Responsible for cutting wires and strip two ends in the copper cable wire recycling machine. Under machine halt, upper and lower blade should be open to the largest extent so that wires are able to pass the cutter assembly.

4. Gap adjustment knob for entry capstan: Adjust the gap between entry capstans. Swirl it up, the gap increases; otherwise, it decrease. All these depends on the diameter of the wires.

5. Lift button for entry knob: Lift the entry knob when the wires pass. Clockwise swirl the button is to lift the entry knob; rather, it is to lay down the entry knob when the wires have passed.

6. Lift button for exit capstan. When take out the wires, you should lift exit button. Anticlockwise swirl the button, it will lift the exit capstan, otherwise, it will lay down the exit button.

7. Entry capstan: Input wires and strip the front part of wires. When the length of the wire line is below 50mm, both the ends of the wire lines can be stripped.

8. Gap adjustment knob for exit capstan:The working principle of copper cable recycling machine is same with the gap adjustment for entry capstan.

9. Exit capstan: Output wires and strip the other end of wires.

If you want to know information about the machine, welcome to contact with Fote Machinery: [email protected].

copper cable recycling machine: http://www.chinaftm.com/products/Cable-recycling-machine.html

cable recycling machine: http://www.ftm-mac.com/tmj.html
basic parts of cable recycling machinery: http://www.fte-china.com/pro/cable_recycling_machine.html
copper cable wire recycling machine: http://www.chinaftm.com/products/Cable-recycling-machine.html