When choosing a rubber ring, some people may not pay attention to its material, which leads to choosing the wrong rubber ring. Because of this, many people will try to understand some problems that should be paid attention to when choosing a material. Then, Rubber Rings Factory introduces the considerations for selecting rubber rings:
1. It depends on its mechanical movement speed. Generally, the material of the seal is different from the ability to adapt to mechanical motion. Ordinary materials cannot meet the needs of high-speed operation. Therefore, when choosing the material of the seal ring, you must choose the one that can tell the operation according to the situation.
2. It depends on its pressure. The rubber ring is also very sensitive to working pressure, so the pressure on different materials is naturally not painful. If the medium is oil, then the pressure that needs to be withstood is relatively small. If the pressure withstands exceeds the pressure that the material should withstand, Then, the service life of the sealing ring will be reduced a lot.
3. Whether the medium is compatible. This is something you should pay special attention to when choosing a rubber ring. If the media contact compatibility is not good, it will damage the sealing ring or cause the media to be contaminated. In addition, its material must not be able to Corroded by the medium.
4. Temperature. The temperature has a great influence on the rubber ring. Whether the temperature is too high or the temperature is too low, the sealing ring may become brittle. Therefore, the appropriate temperature selection is very important.
Through the above introduction, Pe Tubes Manufacturers hopes that you can simply refer to the content of this article in future use.