Rubber Rings Factory introduced the production of PE pipes, which usually have higher technical requirements. Most manufacturers have not reached this level of technology, the equipment is not perfect, financial resources are not allowed, etc., so they will limit their production hard power.

The demand for large-diameter PE pipes is increasing, and the demand for diameters is also increasing. PE pipes with a diameter greater than 400mm can be classified as large diameter PE pipes. In recent years, some domestic PE pipe manufacturers have also produced large-diameter pipes, but due to equipment and technology, the largest diameter at home and abroad is generally around 1200mm, while there are few manufacturers of 1400mm PE pipe, let alone 1800mm. There may be only a few in China. They are all large factories with many years of history in the PE pipe industry. Production equipment without diamonds cannot do porcelain work. There are very few large-diameter manufacturing equipment in the world that can be produced. Battenfeld in Germany is one of the best. The high requirements of production equipment also represent high capital.

As we all know, in the extrusion process, the production of PE pipes is almost extruded. The larger the diameter, the higher the process requirements. Any errors in temperature, extrusion rate, pressure, mixed composition, etc. will cause the quality of the entire pipeline to drop. Enough production experience is needed to control the production of large diameter PE pipes.

Through the above introduction, Pe Tubes Manufacturers hopes that you can simply refer to the content of this article in future use.