Plastic Balls Manufacturer introduced that it is difficult to manufacture hollow balls. The main reason is that the temperature of the hollow balls cannot be too high during the welding process. When the temperature exceeds 210 degrees, it will release pungent gas, but the welding temperature is too low and will affect the welding. The effect will also affect the quality of the hollow ball.
Since hollow balls cannot be welded at high temperature, the welding time can only be lengthened to solve the problem of low temperature. Another method is to modify the machine for welding plastic hollow balls, and add an air suction device to the upper welding machine. The pungent gas generated during the hollow ball welding process is discharged outside through the air suction device. The plastic hollow ball welded by this method has the best effect. The welded hollow ball has high strength, good precision and the best quality.
Through the above introduction, Rubber Rings Manufacturer hopes that you can simply refer to the content of this article in future use.