Welding Parts Suppliers (XINGHUI) unit comes complete with a constant voltage power source with an integral wire feeder. The gun and work clamp use the included spool of self shielded flux core wire to make the sparks, smoke and welds. Protect your eyes from the arc light using the included handheld welding helmet or let your friends or family look over your shoulder to see what's going on . With one screw we quickly install the handle on the top of the case. With a small wrench for maintenance and some extra contact tips we should be able to knock out our next light steel welding task.

Having a chart of suggested settings right inside the lid makes for easy reference when making welds on different thicknesses of steel. The controls are easy to operate and understand. A lighted toggle switch controls the power turning it on or off. A toggle switch for voltage adjusts between the minimum and maximum amount. The wire feed speed knob adjusts the speed of the wire to make the it burn off clean and smooth. A fault light indicates internal issues that need service or the fact that we have overworked the machine beyond it's rated duty cycle. Other than squeezing the trigger and putting on our welding hood on, there's not really much more to adjust to make the weld. With the chart inside of the lid as your basic guide, make adjustments as needed to achieve a smooth crisp arc.

When using any MIG welder or Flux Core Arc Welding machine, we should make small adjustments to our settings and then make another test weld to see the results of the adjustment. Having clean material free of rust, paint, oil or other debris is key to your welding quality. Maintaining the proper stick out, electrode angle, and travel speed is critical to get a quality weld using any Flux Core Arc Welding process. Practice and experimentation are your best tools when learning how to weld.

Click Metal Stamping Parts to learn about more information
https://www.nbstarlite.com/