China Awning Motors Suppliers introduces the power reserve skills of electric curtains:
1. Install a socket in an inconspicuous place to provide power to the electric curtain. The socket is at least 5 holes according to whether there may be other electrical appliances nearby. In this way, if you don’t like the electric curtains in a few years and you have to replace them, this circuit can be used for other purposes. Sometimes it can also be used as a power source for air conditioners. Of course, in this case, wire a larger diameter wire.

2. The choice of the socket location: the best choice is the corner wall adjacent to the wall where the curtain hangs. The purpose of this is for safety. If the curtain blocks the tea seat, it is easy to cause a safety hazard when the circuit goes wrong.

3. From the perspective of home use, it is not recommended to install it at the top, instead I prefer to install it at the bottom. Other electrical appliances or plug-in boards can be connected when needed, which will not be unsightly and save the budget for hydropower transformation. Objectively speaking, compared with the decoration value of your entire room, electric curtains are only a small part of it. There is no need to set up a flapper in a high place for things of this value. In the future, if your room cover is arranged, the possibility of using it above the board is too small.

Through the above introduction, Alexa Controlled Blinds Factory hopes that you can simply refer to the content of this article in future use.

https://www.wistarmotor.com/