Windows Update is present to maintain Windows and other Microsoft software upgraded, usually with very little intervention. Unfortunately, occasionally a lot of these patches will make a issue, which range from serious ones such as error messages preventing Windows from beginning, to less severe ones such as audio or video issues.
If you are convinced the problems you are experiencing started just after a couple of Windows upgrades, whether automatic, manual, you can continue reading for assistance about how to resolve this.
Follow this troubleshooting guide in case you are not able to operate Windows normally after a couple of Windows upgrades were installed.
Restart your PC.
Whatever issue the upgrade(s) caused can clear up itself using a very simple power off and power.
Odds are you have done this a few times but otherwise, give it a go.
Hint: If you are able to inform your pc is "running hot" thanks to all of the job it has been doing attempting to boot up, try powering off it for an hour or so before starting this up again.
Start Windows using Last Known Good Configuration that will try to start Windows utilizing driver and registry info that worked the last time that it had been successfully launched.
Notice: The Last Known Good Configuration option is only available on Windows 10.
Start Windows in Safe Mode.
If you're able to begin in Safe Mode, follow the advice over from the Windows Starts Successfully tutorial.
In case you cannot start in Safe Mode, do not worry; simply proceed to the upcoming troubleshooting step under.
Entire an offline System Restore to re install the Windows upgrade(s). Make sure you pick the restore point made just before the installment of the Windows upgrade(s).
Notice: A normal System Restore is performed from within Windows but as you cannot get Windows at this time, you will want to finish an offline System Restore, which means from out of Windows. This choice isn't available in Windows XP.
Important: Considering each the changes made from the upgrades are reversed in this procedure, it is very likely to fix your issue.
Test your memory and then examine your hard disk. No Windows upgrade can physically hurt your memory or hard disk but their setup, like every software setup, may happen to be a catalyst that attracted these hardware problems to light.
Change the memory or replace the hard disk when the memory or hard disk tests fail, then install Windows again.
See How to Repair a Blue Screen of Death in case your difficulty is really a BSOD.
There are a couple more thoughts in that troubleshooting manual which may be relevant to your situation, particularly in the event that you suspect there may be a non-Windows-update reason behind this mistake.
If all former debugging has neglected, you are going to need to take more invasive steps to receive your computer back in working order.
Locate your version of Windows under and execute the repair job recorded. If your model has more than 1 choice, try the first one first because it is less damaging:
Windows 10:
Utilize Reset This PC to reinstall Windows 10, with or without maintaining your personal files undamaged. See How To Recover Your PC in Windows 10 to receive Assistance.
You may additionally Clean Install Windows 10 in case Reset This PC does not work.