Just for healthy family fun in the summertime, nothing beats the enjoyment of an outdoor swimming pool. But hot summer days are numbered, especially if you are living in the Northeast, and no one wants to swim in cold, distressing water. So before you dive into an investment this deep, ensure that you consider the many benefits to keep your water warm and inviting.

One of the most reasonable and energy-efficient ways to warm an outdoor pool, a pool warmth pump uses a small amount of electricity to capture heat from the outside air and also transfer it to the pool's water. Unlike conventional oil and also gas pool heaters that generate heat by burning fossil fuels, heat pump pool heaters are environmentally friendly and offer significant health benefits for homeowners in the Northeast, from efficient, quiet operation along with long-term performance to reduced fuel costs and a longer paddling season.

Starting at around $1, 500 for a basic typical unit, pool heat pumps do have a higher start-up price rather than conventional pool heaters. After the initial purchase and installation, yet , these cost-effective heating systems operate at 1/3 the cost of an established oil or gas pool heater, saving homeowners serious revenue on long-term energy usage.

Using the same principles as wine cellar coolers and air conditioners, a swimming pool heat pump pulls water on the pool's pump as it circulates the pool's water and flows it through a filter. A fan in the heat pump draws in the outside weather and directs it over an evaporator coil. As long as the outside temps remains above 45°F, liquid refrigerant within the evaporator coil absorbs the heat from the outside air and becomes a gas. The warm energy in the coil then passes through a compressor, which increases the high temperature, creating a very hot gas that then passes through a condenser. The very condenser transfers the heat from the hot gas to the cooler billiards water as it circulates through the heater. The heated water then simply returns to the pool. The hot gas, as it flows through the condenser coil, returns to liquid form and back to the evaporator, where the whole process begins anew.

Pool pumps are available for together in-ground and above-ground pools and should be sized according to the pool's surface area as well as the difference between the pool's water temperature and the average oxygen temperature. Wind exposure, humidity levels, and night temperatures can affect the heating load of an outdoor pool. Pool heaters are actually rated by Btu output and horsepower (hp), with ordinary sizes ranging from 3. 5 hp/75, 000 Btu to 6 hp/125, 000 Btu.

The energy efficiency of heat pumps for pools is certainly measured by the coefficient of performance, or COP, and values from 3. 0 to 7. 0, with seven appearing the maximum. This measurement refers to the relation of electrical energy put in and then the amount of heat put out. Typically, manufacturers measure the COP by just testing a heat pump heater with an outdoor temperature for 80°F and a pool temperature of 80°F.

With proper unit installation and maintenance, your heat pump pool heater can offer the utmost on efficiency. It's best to let a qualified pool professional install your heating pump and perform any complicated maintenance and repairs, particularly the initial electrical hookup. Because of a heat pump's many moving in addition to electrical parts, periodic service and annual tune-ups should also finished by an experienced pool heating professional.