Some people might think that applying a car paint protector and a car polish compound is just extra expense and effort to maintain a car. Both products can do so much, however, in restoring how the paint looks despite the abuses the car’s surface faced. A car paint protector can also prevent the damage seemingly harmless watermarks can make on the car’s clear base.

If your car suffers from watermarks and you’re having a hard time removing the watermarks without damaging the paint, here are things you can do. They are surefire ways to bring your car’s lustre back.

Have it pressure washed by professionals

Do not wash your car on your own unless you have a pressure washer and you know how to operate it. The best route is to have professionals wash your car instead so that you’re sure all the debris is off before you start sponging your car with soap. After the first thorough pressure rinse, you may start lathering your car with a special car shampoo that can release any other build-ups that are left on the surface without affecting the integrity of your clear base. The key to getting rid of stubborn watermarks is to clean off the surface first. However, that is not all.

Dry it professionally

Watermarks are left on your car’s paint surface when you let drops of mineral-rich water air dry or bake under the sun without wiping them off. While you might think drops of water are annoying but harmless, the deposits in the water drops can compromise the health of your car’s paint. If you are lucky, the damage will only be done to the clear base and it can easily be fixed using a car polish compound later on. Severe buildups can affect the main colour, however, and your car’s surface may suffer from slight discolourations and scratches. To avoid watermark damage, you should dry your car’s surface with a chamois towel until it is completely dry. Use steady, circular motions while wipe drying with the chamois. Squeeze dry the chamois towel until your car is completely free from water droplets. It’s a tedious task but it’s worth it.

Wax it with a Car Paint Protector

Once completely dry, you would want to protect your vehicle from future hard water damage. Applying a car paint protector or a special car wax can do the job. Just like while you were drying the surface of the car, use steady circular motions in your application and make sure the application is even. If you are unsure about the procedure, you can hire professionals first and watch how they do it. Car paint protector products like the ones NanoTech SST is offering is easily available. If you must wax at home, choose the best product from NanoTech SST to make sure your car’s paint won’t be compromised. Some waxes may be cheaper but they do not offer much in terms of protection and their acidity levels can damage your car paint.

Buff it With Car Polish Compound

If you want to revive your car to its brand new shine, you must buff it with car polish compound. Car polish compound repairs indentations caused by hard water baking into your car’s surface and is easily available at NanoTech SST. You should also use steady, circular motions and make sure the application is even. Some professionals also use an electric buffer but be careful not to put too much pressure because you want your car shiny, not damaged.

For more products that can restore your car’s lustre, check out NanoTech SST. They offer free delivery within the United Kingdom for orders over £50.00.

For more information visit https://www.nanotechsst.co.uk/product-category/car-care-protection/