FAG bearing installation is correct, affects the precision, life and performance. Therefore, design and installation of assembly department for FAG bearing to fully

research. Hope to work in accordance with the standards for installation. Operation standard project usually is as follows:
(1), cleaning FAG bearing and FAG bearing parts
(2), check the size of the interrelated parts and finish machining
(3), installation,
(4), installed FAG bearing after inspection
(5), supply lubricant
Hope before the installation, just open the FAG bearing packing. General grease lubrication, cleaning, not directly fill grease. Lubricating oil, ordinary also don't

have to be clean, but the instrument using or high-speed FAG bearings, such as to wash with clean oil, remove rust inhibitor on the FAG bearings. Remove the rust

inhibitor FAG bearing, easy to rust, so can't place. Also, has the FAG bearing grease sealed, not directly use cleaning.
FAG bearing installation method, because the bearing structure, cooperate, conditions vary, in general, as more as the axis of rotation, so the inner circle need

interference fit. Cylindrical hole bearing, multi-purpose press pressure into, or multi-purpose hot charging method. Taper hole, installed directly on the taper shaft,

or use the socket installation.
When installed on the shell, clearance fit more commonly, outer ring have surplus quantity, usually use the pressure into the press and or have shrink fit method of

cooling after installation. Use dry ice as coolant, shrink fit installation, the moisture in the air condenses on the surface of FAG bearings. So, need a good rust

prevention measures.