Why build my own cable head-end?
First of all, why would you want to build a cable head-end? Why not just take the regular cable signal from your cable provider and distribute that over RF around your organization? Well, for a lot of people “regular” cable (ie what you get without any kind of a receiver or set-top box) doesn’t include channels that are important to them. Regular cable might not include certain sports packages – like NFL Sunday Ticket or NBA League Pass on DirecTV – or other channels.

HDMI Encoder Modulator,16in1 Digital Headend,HD RF Modulator at Soukacatv.com

4 In 1 Agile TV Modulator For Cable TV System

For example, say CSPAN is important to you. Well, here in Houston, TX, our local cable provider (Comcast) has been moving channels from the “analog” spectrum into the digital only spectrum and CSPAN has been one of the channels that’s been moved. So the only way to get CPSAN in Houston on Comcast is using a digital cable box (or a DTA – digital to analog – box). And if you want to distribute that channel around to various TVs in your office without a digital cable box at every TV, then you look at building your own regular cable head-end!

Another reason why you might want to modulate your own cable line-up is you might want to include non-TV channels on your cable line-up. For example, maybe you have a few security cameras that you want to modulate to certain channels on your cable system.

Adjacent Channel 16 In 1 Analog Headend For Hotel Cable TV System
How do I build my own cable head-end?

So how do you create your own cable head-end? It’s surprisingly easy. Here’s a high-level overview of what your system will look like:

1. Your TV source is usually going to be either satellite (here in the US that means DirecTV or Dish) or digital cable. Depending on how many channels you’re modulating (‘n’ in the above diagram), you’ll need a corresponding number of receivers or set-top boxes from your provider. And if you’re using a satellite service like DirecTV, you’ll need a multi-port switch to drive all of those set-top boxes off of one satellite dish. A multi-port switch is a sort of splitter for satellite service.

2. Each set-top box is set to a particular channel on that TV source. Then that set-top box connects to it’s corresponding modulator via RCA video and audio cables. Generally speaking, analog modulators come in two varieties:

· "Channelized" modulators – this kind of modulator is hard-wired to modulate the audio/video passed into them to a particular channel # (ie to a particular frequency of the RF spectrum). You can’t change the channel number that it outputs on-the-fly.

· "Agile" modulators – with an Agile modulator, you can configure, on the fly, what channel you want it to output on. This provides more flexibility with the channels you can output on, but with some sacrifice of quality. Agile modulators are also more expensive (roughly twice as expensive) than "Channelized" modulators.

The typical recommendation, as I’ve heard it, is that most of your modulators can be “channelized” and then maybe you add a few “agile” modulators in case you need to modulate to some random channels later down the line.

3. And then each of the modulators connects to the combiner via RF and the combiner mashes all the channels together into one RF signal. There are two types of combiners – ones with amplifiers built-in (“active combiners”) and ones without amplifiers (“passive combiners”). Depending on how you’re distributing RF (the next step), an “active” combiner might save you the need for a dedicated RF amplifier on the output of the combiner.

4. Last but not least, you need to distribute your new cable signal throughout your organization. Designing an RF distribution system is a separate topic unto itself (discussion of splitters and taps, signal loss of distance, etc.), but for simple configurations, you just need to amplify the signal at the exit to the combiner. How much you need to amplify it depends on how many ways you’re splitting it and how long the distances are in your RF network.

If you’re doing all of this so you can record TV and search over it with SnapStream, your SnapStream Server is 100% compatible with your new custom cable line-up. We have the ability to create custom line-ups so your program guide in SnapStream exactly matches how you have your channels configured.

Established in 2000, the Soukacatv.com main products are modulators both in analog and digital ones, amplifier and combiner. We are the very first one in manufacturing the headend system in China. Our 16 in 1 and 24 in 1 now are the most popular products all over the world.

For more, please access to https://www.soukacatv.com.

CONTACT US
Company:Dingshengwei Electronics Co., Ltd
Mobile : 13410066011
Email : [email protected]
Website: https://www.soukacatv.com
Tel : +86 0755 26909863
Fax : +86 0755 26984949
Address : BldgA,the first industry park of Guanlong,Xili Town,Nanshan,Shenzhen,Guangdong,China

Source: blog.snapstream