The braking mechanism is created for handling change of the vehicle speed; it stops and keeps the auto in position for a very long time by the usage of braking force between the wheel and the road. The force of brakes can be created by a wheel brake mechanism, by the motor vehicle - the so named engine braking, and by electrical or hydraulic retarder in transmission. To apply these functions on a car, you'll find the following kinds of braking systems: operating, replacement and parking.

The operating system is the fundamental command unit and safety in a vehicle, on the durability of which depends the lives of travellers. The handbrake or parking brake is activated at long parking of the auto to stay away from inadvertent movement, particularly on stretches of on road with an incline. It may be utilized as an emergency brake. And fans of driving may use this device to block the rear wheels to complete a clear turn, the so named U turn. The replacement brake system has been placed only recently and is utilized for urgent braking in a failure of the operating system. It's installed usually on automobiles with electrical handbrake. Since the handbrake while driving won't be able to apply, with a basic movement of the lever of emergency braking, the wheels are locked and the car will stop. Replacement system may be applied as a separate unit or as part of the operating system. An excellent brake service can help you to repair any kind of braking mechanism if you have some difficulties with it.

The brake system of the car is based on the physical phenomenon referred to as friction. It is because of friction from a standing element and a rotating one, braking effect is obtained, but as it happens, we'll talk later. In the course of braking, friction happens between the friction linings of brake pads of a soft material and the rotary brake disc or brake drum. Due to this attribute, the brakes are divided into the spinning and drum brakes. But in modern vehicles there is generally applied their symbiosis: front spinning brakes and rear drum. However, there are many possible choices: it all depends on the makers.

A great brake shop will check the condition of the braking system and evaluate the degree of wear. If required it will remove the brake discs and will replace them. You need to find a good service and will keep safe when driving the car.
For more info about Brake Pads check here https://plus.google.com/113808333912512963762/about