A ladder rack is an important accessory for your truck or van so as to be able to fit your ladders and take them wherever you go. This is especially important when you have a job that requires you to climb places. When you have a rack, be sure that it will be very convenient for you. A ladder rack doesn’t always come in handy only when it comes to ladders, but also when you need to transport other things. You may want to have your own customized rack but do not know how to construct one. Building one on your own is a very good idea because you will not only make it in your own way but also save a lot of money. Ladder racks can be quite expensive to purchase and install. This is why buying one would be advisable.

When you are building a ladder rack, the first things you can do is get the measurements of the truck form the lip of the truck cab then add two feet in case of adjustments. These measurements will clearly differ depending on the size of your vehicle. This is why it is very nice to be able to make it for yourself because you can get the exact measurements and make the adjustments as you please. After that, cut four 2inch by 4inch of wood to the measurement. When you are done with this, now get the measurements of your truck bed add 4 inches to that then cut two pieces of wood to the exact length of your truck bed. You will need to have a compound mitre saw for this. Depending on how your truck looks, the measurement should be taken from the cab of your truck to the bed of the tailgate. You will need to be accurate to avoid any over measurements. Ladder racks need to be made to precision so that they are firm enough.

As you are still in the process of making your own ladder rack, go ahead and measure the width of your truck and do the same as you did with the length; cut 2 inch by 4 of lumber to the exact width of your truck. When you have done that, slide the vertical pieces of lumber into the pole pockets which are in the lip of the trucks bed. This way they should be extending up into the air. Attach them to the truck bed using L-shaped brackets and screws. Drill two screws into the wood and another two into the lip of the truck bed. This makes the ladder racks very firm.

As illustrated, it shows that a ladder rack needs to be in fact well made, and the only way to trust and ensure of this is when you make the ladder rack yourself. Also make certain that you use the best wood to avoid any damage. Well made ladder racks will take you a long way and you’ll not need to replace it.


If you would like to make your own ladder rack http://www.adriansteel.com or would just like to get information on ladder racks http://www.adriansteel.com we will be more than glad to help you.