Float Pontoon Manufacturers Introduces The Design Details Of The Buoy Structure


Posted July 13, 2021 by taizhouglejin

Each group of buoys is made into a long field control structure. Generally speaking, a group of buoys is divided into two buoys.

 
Each group of buoys is made into a long field control structure. Generally speaking, a group of buoys is divided into two buoys. The inner shape of each buoy block matches the outer diameter of the riser and the auxiliary pipe. Float Pontoon Manufacturers introduces what are the buoy structures:

1. The pontoon shell is generally formed by the entire mold, and then the foam material is injected into the packaging method. The surface material generally adopts fiber-reinforced material, which has strong anti-wear and impact resistance. The hard surface of the buoy made of this material can withstand the water pressure in deep water.

2. In some cases, in order to further improve the strength of the buoy block, a layer of reinforcing net is added between the buoy shell and the synthetic foam section.

3. In order to avoid excessive transfer of the bending load caused by the horizontal plane gravity to the buoy during the installation or hoisting of the vertical pipe, two flexible cushions are deliberately designed on the inner circumference of the buoy block.

4. The upper and lower ends of most buoys are designed with a complete set of steel cylinders. One end of each sleeve is designed as a concave end and the other end is designed as a convex end, so that each group of buoys form a buoy string after the sleeve is installed. Conducive to uniform buoy during certain operations.

5. After the buoy block is processed, in order to facilitate the reactor ratio, the outer circumference of the buoy block is usually designed as a plane.

6. The most important function of the buoy is to provide buoyancy for the riser in the water. Each buoy block should be installed and fixed in a specific riser section, and its internal groove shape must correspond to the actual structure of the riser.

7. In order to distinguish the buoys from different water depths, the buoys have different colors.

Through the above introduction, Jet Ski Dock Manufacturers hopes that you can simply refer to the content of this article in future use.

https://www.atboxingsandbag.com/
-- END ---
Share Facebook Twitter
Print Friendly and PDF DisclaimerReport Abuse
Contact Email [email protected]
Issued By taizhouglejin
Country China
Categories Accounting , Affiliate Program , Architecture
Last Updated July 13, 2021