You used to drive your car to your office and you worked only several miles from your home. However, now petrol prices are going beyond control, and you want to have a great electric motorcycle. Creating an impressive motorcycle has always been one of your dreams, and now you want to realize it just to have total costs, keep your mind focused, and have some fun when riding. Actually, learning how to build electric motorcycle is not so challenging. All the purchasing and building process may take approximately $3000. Although it may seem long before you can get any noticeable results from saving gas, but if you calculate the environmental benefits and all the money of building and buying, creating an electric motorcycle is worth all the troubles and efforts. What do you think of a speed of more than 75 mph and only ten miles per charge? Isn't it perfect for a home-made electric motorcycle? If you are learning how to build electric motorcycle, this article shall help you. It will guide you through the basic method needed for building an electric motorcycle. You may need some wielding ability and mechanical skills though. In addition, a bit of knowledge when it comes to motorcycle maintenance may prove useful.
Tips To Build Electric Motorcycle
1. Prepare The Needed Tools And Component
When it comes to how to build electric motorcycle, you must know that the basic components for most motorbikes can be similar even if there are a lot of differences among them. This article shall show you some of the parts and where you can get them, but you should conduct a research of your own and find out the requirements for your unique electric motorcycle. Here are some of the necessary parts for your future electric motorcycle.
2. Frame
The frame of a 1984 Honda Interceptor may prove useful for you, since the style of bike is very eye-catching. It is neither a hog nor crotch rocket. Batteries can be put inside the frame perfectly.
3. Contactor
This special device is where you can hook up to the current key ignition of your bike on 12 volts. After that, the loop will be closed so your controller will get the greatest power. One of the best choices for learning how to build electric motorcycle is Albright SW-200
4. Charger
You will decide the speed of your charge in Amps basing on your current budget, but you must also remember that your voltage have to be matched with your charger. Zivan NG1 may be the best choice for you. Also, a Soneil charger with 3 amps should be good for balancing your batteries.
5. DC Converter
When it comes to learning how to build electric motorcycle, you must know that the safest option is to use a DC/DC converter with an additional 12V battery backup. Still, motorcycles often come with limited spaces, so you can use only your converter. A Sevcon 72V with Input 13.5V is what you should buy today.
6. Batteries
If you want to buy good batteries , Yellow Top Optima may be what you need since it has been backed with very positive reviews. However, if you find that it is impossible to place six large batteries and make the bike look great, you may use the D51 model. The size, weight and storage will all be reduced by half.
7. Controller
Like chargers, the amperage of your controller is dependent on your money but you must remember to match the controller to the voltage. More amps will mean more strength and more money. In fact, you will be left with only two possibilities: either Curtis or Alltrax. That will be yours to decide, but you may give a 72V 450Amp Alltrax a try. Building a potentiometer on your backward throttle is a waste of time. What you should do is to buy a new one and get everything completed.
8. Fuses
You may get various setup and configuration but a suitable fuse that can match your selection is always important.
9. Other Parts
You may need other parts to learn how to build electric motorcycle:
- Wire wrap
- 12 GA wires with multiple colors along with heat shrink tubing
- Wire connectors
- Electrical tape

For the original version on Web visit: http://howtobuildelectricmotorcycle.weebly.com/