Since it’s established in 1983, ShinMyung Engineering has been dedicated to conducting constant researches and technology development, which has made us emerge as the world-class facility manufacturer.
OPC (Organic Photo Conductor) Drum Coating system
OPC (Organic Photo Conductor) Drum Coating System is the in-line system that performs the entire process to determine product properties of OPC drum, including cleaning, coating and drying.
It is recognized as the optimum facility for OPC production, with advantages of changing models without changing tools and excellent productivity of in-line systems.
Process:
1. Washer
Remove grease, dust and other alien substance on the interior & exterior surface
Model Change
- Air Picker Chuck Replacing Type
- Common Finger Chuck Use
2. Elevator
Drum Chucking on Pallet -> Coating -> Lower Washer Moving,
Lower Unit Washing -> Pallet Moving
Model Change
- Common Chuck Use
3. Coating Unit
Coating after loading the drum in each cylinder
Prevent alien substance mixing by performing cover up/down
- Common Chuck Use
4. Circulation Unit
Connected to the coating unit to supply coating liquid
Ultrasonic wave for CG available
- Common Chuck Use OPC Drum Coating System
5. Lower Unit Washer
Wash the bottom and in and out of the drum
by cleaning solution and brush
Model Change
- Replace tools by model
6. Dryer
Dry the coated drum by hot air and cool it down
Standard Structure
- UCL / CGL / CTL 1 Set Each
Pusher Type Furnace
Pusher Furnace, a representative equipment in the firing process, is designed to push the conveyor using the pusher to move the product.
It is used for the firing process of various types of products and it shows excellent heat resistance, insulation efficiency and wear resistance against the conveyor. Mesh Belt Type Type Furnace
Designed as a tunnel type, Pusher Furnace implements continuity of an automated production system and uniform production based on ambient per zone and temperature control.