Then Construction will not pave observe the color of the wallpaper have color (flowers, pass direction), if there is color construction should stop, if the construction after the wallpaper color differences, should be light, or moisture contrast. 3, fall off wallpaper: wallpaper off after construction, the wall should be checked whether the deal meets the requirements or glue.

4, Alice wallpaper: wallpaper after construction edge tilt, check gluing is uniform and water-absorbing walls, appropriately increase the adhesive strength of the glue. 5, the edge of the paper dirt: Check the construction of the wall and desktop is dirty or remove excess glue. 6, edge lit: the construction of the edges by pressure and friction is too large, should reduce the friction of strong paper, and check the edge of the wallpaper glue is clear and clean. 7, contraction joint: Wallpaper shrinkage cracks after construction, should check whether the construction method is not correct or poor adhesive strength glue, construction shrinkage will occur when the sealer dry wall low end processing. 8, wallpaper through the end: After exposing the background wallpaper construction or shading, you should check the walls are the same color or glue is stacked. 9, bubbles: Check the amount of glue applied or whether the wall coating may be poured glue into the bubble at the wallpaper snugly. Wallpaper quality defects Glossary 1, color: wallpaper construction after the same batch of the same box, the color of significant differences, the impact of wallpaper decorative effect. (According to the requirements of construction), there are two cases: about color refers to the plain wallpaper on both sides there are significant differences; the color difference before and after referring to the same volume or the same color box wallpaper significant difference between the two, holidays: a no PVC wallpaper surface layer, paper exposed bottom affect wallpaper decorative effect. 3, were missing: not a wallpaper printing surface, exposing the PVC layer on wallpaper decorative effect. 4, the leakage pressure: Wall paper surface by a no embossing.

5, embossing depth: edge embossed with the rest of shades (shades on both sides), the same case or the same volume wallpaper embossed depth (front and rear shades), in sharp contrast to the impact of construction wallpaper decorative effect. 6, blur the line: 1.5M visually obvious and affect the results of intensive. 7, misregistration: clear edge contour patterns printed overlay deviation is greater than 2mm or visually apparent, abstract pattern wallpaper freehand outline requirements are relatively relaxed. 8, trimming deviation: wallpaper pattern width and width deviation cycle, so that the pattern parquet incomplete. 9, not on the flowers: wallpaper trimming shift, so that the front and rear roll wallpaper roll wallpaper pattern parquet incomplete. Affect wallpaper decorative effect.

10, burst burst bottom edge: wallpaper, or bottom edges of the paper serious burst, wallpaper, decorative effect of the fracture surface. 11, pen marks: wallpaper surface pen marks or symbols. 12, white rim: Edge leaked wallpaper white side or bottom of the paper. Significant impact after construction contrast decorative effect. 13, pleat: wallpaper surface crease significantly influence wallpaper decorative effect. 14, rejection color: color of the wallpaper and patterns significantly reduced or loss, affecting wallpaper decorative effect. 15, delamination: PVC wallpaper surface layer and bottom paper separation.

Wallpaper Manufacturers, Custom Wallpaper, Wallpaper Suppliers, China Wallpaper, Wallpaper china, Wallpaper Manufacturers in China, China Wallpaper Manufacturers, Wholesale Wallpaper Suppliers, Cheap Wallpaper Suppliers, Pvc Wallpaper Suppliers.
Website: www.wallpaper-manufacturers.com